Re: Setting the SCSI ID on a Seagate ST1480N disk

Article View: comp.periphs

Article #1281

#1281

From: Dave Olson
Date: Sun, 22 Nov 1992 21:39

12 lines
1153 bytes

In <1992Nov22.053851.1849@cs.ucla.edu> tamir@lanai.cs.ucla.edu (Yuval Tamir) writes:
| I am trying to set the SCSI ID of a 400MB Seagate ST1480N disk to 1.
| Currently, it appears to be set to 3.  Unfortunately
| I don't have the manual and I have not been able to locate the
| set of DIP switches or connectors where the SCSI ID is set.

No DIP switchs.  It is set by a set of small jumpers on the right
side of the drive near the front (as you face the drive).
--
Let no one tell me that silence gives consent,  |   Dave Olson
because whoever is silent dissents.             |   Silicon Graphics, Inc.
    Maria Isabel Barreno                        |   olson@sgi.com

Technical Details

Message-ID: <smoicuc@zuni.esd.sgi.com>

Path:

arc1-ca.pugleaf.net!sparky!uunet!zaphod.mps.ohio-state.edu!uwm.edu!psuvax1!rutgers!sgigate!sgi!twilight!zuni!anchor!olson

References: <1992Nov22.053851.1849@cs.ucla.edu>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!sparky!uunet!zaphod.mps.ohio-state.edu!uwm.edu!psuvax1!rutgers!sgigate!sgi!twilight!zuni!anchor!olson
From: olson@anchor.esd.sgi.com (Dave Olson)
Newsgroups: comp.periphs
Subject: Re: Setting the SCSI ID on a Seagate ST1480N disk
Message-ID: <smoicuc@zuni.esd.sgi.com>
Date: 22 Nov 92 21:39:37 GMT
References: <1992Nov22.053851.1849@cs.ucla.edu>
Sender: news@zuni.esd.sgi.com (Net News)
Organization: Silicon Graphics, Inc.  Mountain View, CA
Lines: 12

Reply to Parent Message