Need dip switch settings for star Gemini printer

Article View: comp.periphs

Article #1334

#1334

From: Golando Gathings
Date: Sat, 15 Jun 1991 16:01

9 lines
800 bytes

	I have just aquired a Star gemini 10x printer with
	no manual, and either the dip switch settings 
	needed to set the printer in IBM mode or the software comm
	ands needed to do this

	All replies are welcome.

Golando

Technical Details

Message-ID: <1991Jun15.160102.2747@cs.utk.edu>

Path:

arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!magnus.acs.ohio-state.edu!usenet.ins.cwru.edu!gatech!utkcs2!hydra3e.cs.utk.edu!gathings

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!magnus.acs.ohio-state.edu!usenet.ins.cwru.edu!gatech!utkcs2!hydra3e.cs.utk.edu!gathings
From: gathings@hydra3e.cs.utk.edu (Golando Gathings)
Newsgroups: comp.periphs
Subject: Need dip switch settings for star Gemini printer
Keywords: help
Message-ID: <1991Jun15.160102.2747@cs.utk.edu>
Date: 15 Jun 91 16:01:02 GMT
Sender: usenet@cs.utk.edu (USENET News Poster)
Reply-To: gathings@hydra3e.cs.utk.edu (Golando Gathings)
Organization: Univ of TN, Knoxville - CS Department
Lines: 9