🚀 go-pugleaf

lbusch@sojourn.com (Lou Busch) wrote:

>If you are running Win'95 you may have a bit of a problem.
>If the scanners firmware revision is 2.6 (or less) the VS211_1.ZIP
>(Vista Scan) drivers do not seem to support the UC630.  The VistaScan
>"Scanner Test" doesl work, but other programs report that "The current
>driver does not support the scanner attached to the computer" or some
>such . I have spoken with UMax support and they thought my 2.6
>firmware was the problem (but they weren't ABSOLUTLE sure). I'm
>getting an updated chip (2.8 I think they said) and then we'll see.
>Under 3.1+ the drivers on their bbs did support my revisions 2.6  and
>I was using files 118_1.zip and 118_2.zip. Another post here suggests
>even later (SU120_1.EXE   v1.20??) drivers are available.
>Good luck and let me know how you fare.

Follow up,
The 2.8 bios arrived yesterday, installed it and the scaner is
recognized and works with the vistascan drivers.  HiJak Pro (not '95)
GPF's after one scan though.  The adaptec scsi utility works as does
PSP.
Good luck,
>
>HTH
>
>Lou
>lbusch@sojourn.com
>

Lou
lbusch@sojourn.com