🚀 go-pugleaf

I  have two network cards which I am having problems  configuring 
under W95. The first is down to lack of docs:

CARD: LAN RESEARCH LR2000 16 bit ISA

It has:

JP4 numbered 2 to 7, which I presume are IRQ jumpers.
JP1 and 2 which I assume are IO and ROM Address.

A 10 switch DIP.

Can anyone provide me with the settings? I had it working, or  so 
it  seemed, but there must a some undetected IO clash,  as  files 
copied across form one W95 to the other (peer networked,  NETBUI, 
default settings for MS client etc).

SECOND CARD is a 3COM 3C509 Etherlink III Combo ISA card with  no 
switches. Windows 95 detects it and only allows configuration  of 
IO,  which seems not to clash. If put on detected, it shows  it's 
using IRQ 3 (i've disabled COM2 on the system's IDE  controller). 
Still,  SYSTEM  flahs  a  problem via  !  suggesting  a  hardware 
conflict.
-- 
David Longley

Longley Consulting                                                  London, UK
Behaviour Assessment & Profiling Technology,
Research, Data Analysis and Training Services,
Small IT Systems                                http://www.longley.demon.co.uk