🚀 go-pugleaf

I don't think the pr233 (since it was produced on an older process)
overclocks well.  I bought one of the first ones out and it would *almost*
run stable at 200mhz, but not quite.  Some folks with newer ones have been
able to get them up to 225mhz.  The newer m2-300 I purchased works fine at
262.5 (3.5x75 - but ymmv).  The newer ones seem to be more overclockable.
Obviously the type of motherboard you have makes a big difference.  My
mtech r542 wouldn't even run the m2-300 at the rated 233mhz, the newer
super7 soyo runs it at the higher speed fine.... cpu's aren't overclocked
from the factory.  I'll be purchasing an m2-333 soon...i think it should
hit 280-290 mhz with some luck....

Peter Tong




mrdata wrote:

> TC wrote:
> >
> > Hi there,
> >
> > Is it possible to overclock This chip?
> >
> > TC
> >
> > Pls e-mail to me: tszchung@hk.super.net
> ========
> Anything is possible TC, however the Cyrix CPUs do not lend themselves
> well to overclocking.  Cyrix cpus are overclocked from the factory to
> start with...  STD spec is 66MHz and Cyrix's units are standard at
> 75MHz.  If you do manage to OC the devil you will find the rest of your
> system unstable. :(
>
> regards
> mrdata