Micropolis 1375 SCSI drive

Article View: comp.periphs

Article #320

#320

From: Ing-Chin Hwang
Date: Mon, 09 Oct 1989 03:19

15 lines
982 bytes

Can anyone help me on this?
I got a Micropolis 1375 SCSI drive originally used on a PC with a SCSI
to AT controller. The drive was working fine on the PC but when I
moved it to my mac and reformatted, it failed all the tests I run,
with results ranging from 'block 0 is bad' to '32 bad blocks out of the
initial ~320 blocks'. Was I doing something stupid? Is there any jumper
to change. Can anyone tell me what are these jumpers ( the one besides the
50 pin SCSI connector) for? I know the first three are for SCSI ID.
Thanks a bunch.


-- 
Ing-Chin Hwang				
ichwang@cs.utexas.edu			 
{uunet,rutgers,ti-csl}!cs.utexas.edu!ichwang

Technical Details

Message-ID: <894@rodan.cs.utexas.edu>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cs.utexas.edu!ichwang

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cs.utexas.edu!ichwang
From: ichwang@cs.utexas.edu (Ing-Chin Hwang)
Newsgroups: comp.periphs
Subject: Micropolis 1375 SCSI drive
Keywords: SCSI, AT, Mac
Message-ID: <894@rodan.cs.utexas.edu>
Date: 9 Oct 89 03:19:07 GMT
Organization: U. Texas CS Dept., Austin, Texas
Lines: 15