SGI IRIS 80GTB SCSI bus problem solved

Article View: comp.periphs

Article #329

#329

From: Timothy L. Kay
Date: Sun, 15 Oct 1989 20:49

16 lines
1106 bytes

I recently posted that we were having trouble when we tried to
hang too many devices (6) off the 80GTB SCSI bus.  I got many
very useful responses, and lots of good information.

It turns out that I made a bad assumption.  I had assumed that Silicon
Graphics would ship their $100,000 machine configured correctly!  It
turns out that they sent it out with too many terminators already on
the bus!!!  When I added our drives, I very carefully removed the
terminators that were supposed to be there (on the disk drive), but I
failed to remove the terminators on the SGI supplied tape drive.  Thing
is that they should never have been there in the first place!!!

Grrrrr.

Tim

Technical Details

Message-ID: <12249@cit-vax.Caltech.Edu>

Path:

arc1-ca.pugleaf.net!utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!ames!henry.jpl.nasa.gov!elroy.jpl.nasa.gov!cit-vax!tim

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!ames!henry.jpl.nasa.gov!elroy.jpl.nasa.gov!cit-vax!tim
From: tim@cit-vax.Caltech.Edu (Timothy L. Kay)
Newsgroups: comp.periphs
Subject: SGI IRIS 80GTB SCSI bus problem solved
Message-ID: <12249@cit-vax.Caltech.Edu>
Date: 15 Oct 89 20:49:44 GMT
Reply-To: tim@cit-vax.UUCP (Timothy L. Kay)
Organization: California Institute of Technology
Lines: 15