Conner Peripherals CP-340

Article View: comp.periphs

Article #352

#352

From: Keith Fellenstein
Date: Mon, 30 Oct 1989 06:49

16 lines
976 bytes

I have recently purchased a used Conner CP-340 and was hoping someone out 
here could help me with a couple of questions.

1.  What is the physical layout (heads, tracks) or just the total # sectors

2.  How is the addressing jumper configured?  From the top the pinout looks
like this:  ..... .
             .... .

and I was wondering which 2 needed to be closed to set the drive address,
and also if there is a pair that are for a drive activity LED.

Thanks.

Keith Fellenstein
kfellens@Intrepid.ece.ukans.edu

Technical Details

Message-ID: <444@Intrepid.ECE.UKans.EDU>

Path:

arc1-ca.pugleaf.net!utzoo!utgpu!utstat!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!cs.utexas.edu!uunet!deimos.cis.ksu.edu!Intrepid!kfellens

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!utstat!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!cs.utexas.edu!uunet!deimos.cis.ksu.edu!Intrepid!kfellens
From: kfellens@Intrepid.ECE.UKans.EDU (Keith Fellenstein)
Newsgroups: comp.periphs,comp.sys.amiga
Subject: Conner Peripherals CP-340
Keywords: Hard Disk SCSI
Message-ID: <444@Intrepid.ECE.UKans.EDU>
Date: 30 Oct 89 06:49:24 GMT
Distribution: usa
Organization: ECE Dept., Univ. of Kansas
Lines: 16