Re: SCSI question

Article View: comp.periphs

Article #379

#379

From: John Lohmeyer
Date: Wed, 15 Nov 1989 15:05

29 lines
1948 bytes

In article <5675@ncrwic.Wichita.NCR.COM> (Jim Hart) writes:
>The SCSI-2 working document (draft) is available thru
>Global Engineering Documents
>2805 McGaw
>Irvine, CA 92714
>(800)854-7179 or (714)261-1455
>Its document # is X3T9.2/86-109
                   ^^^^^^^^^^^^^
True, Jim, but Global Engineering Documents knows it as: X3.131-198x.  (The
number you gave is the committee document number.)

While I am spending network bandwidth, I should also mention that electronic
versions of the SCSI-1 and draft SCSI-2 standards are available on the SCSI
BBS at (316)-636-8700.  These documents are stored in ZIP format and contain
WordStar (tm) files.  The SCSI-1 files are actually revision 17B, which was
the final approved committee draft document -- it is not identical to the
ANSI standard, but should be technically equivalent.  The SCSI-2 files are
for revision 10b, which is currently in a public review and comment period.

To avoid the usual series of questions:  No, these files are not available
for anonymous FTP (whatever that is :-).  If someone wants to make them
available for anonymous FTP, I'll be glad to cooperate -- I don't have the
resources/knowledge...

-- 
John Lohmeyer         J.Lohmeyer@Wichita.NCR.COM
NCR Corp.             uunet!ncrlnk!ncrwic!entec!jlohmeye
3718 N. Rock Rd.      Voice: 316-636-8703
Wichita, KS 67226     SCSI BBS 316-636-8700 300/1200/2400 24 hours

Technical Details

Message-ID: <420@entec.Wichita.NCR.COM>

Path:

arc1-ca.pugleaf.net!utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!cs.utexas.edu!uunet!ncrlnk!ncrwic!encad!entec!jlohmeye

References: <39190@srcsip.UUCP> <5675@ncrwic.Wichita.NCR.COM>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!cs.utexas.edu!uunet!ncrlnk!ncrwic!encad!entec!jlohmeye
From: jlohmeye@entec.Wichita.NCR.COM (John Lohmeyer)
Newsgroups: comp.periphs
Subject: Re: SCSI question
Message-ID: <420@entec.Wichita.NCR.COM>
Date: 15 Nov 89 15:05:49 GMT
References: <39190@srcsip.UUCP> <5675@ncrwic.Wichita.NCR.COM>
Reply-To: jlohmeye@entec.Wichita.NCR.COM (John Lohmeyer)
Distribution: usa
Organization: NCR Corporation, Wichita, KS
Lines: 29
Keywords: SCSI, commands, ANSI

Reply to Parent Message