QIC-2

Article View: comp.periphs

Article #421

#421

From: Sarge Gerbode
Date: Sun, 03 Dec 1989 15:17

18 lines
1419 bytes

I have an Integrated Solutions Inc. "Optimum" (Q-bus) computer with
an internal Northern Telecom tape drive with a QIC-2 interface
(50-pin cable connector from controller to tape drive).  The tape
drive has never worked properly, despite multiple attempts to swap in
a new unit, so now I am looking for a new tape drive that does work
and that matches the QIC-2 standard.  But here is my question:  I'm
not sure exactly what the QIC-2 standard *is*.  Could I reasonably
expect that any QIC-2 compatible drive would work with my QIC-2
controller?  In other words, does "QIC-2" describe an interface
standard, including controller commands, that any QIC-2 tape will
work off of, or might I need a separate driver for each type of tape
drive, even if they are all QIC-2?

Any help would be appreciated.
-- 
Sarge Gerbode -- UUCP:  pyramid!thirdi!metapsy!sarge
Institute for Research in Metapsychology
431 Burgess Drive; Menlo Park, CA 94025

Technical Details

Message-ID: <934@metapsy.UUCP>

Path:

arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!zaphod.mps.ohio-state.edu!brutus.cs.uiuc.edu!apple!mips!prls!pyramid!thirdi!metapsy!sarge

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!zaphod.mps.ohio-state.edu!brutus.cs.uiuc.edu!apple!mips!prls!pyramid!thirdi!metapsy!sarge
From: sarge@metapsy.UUCP (Sarge Gerbode)
Newsgroups: comp.periphs
Subject: QIC-2
Summary: Need help -- what is the QIC-2 standard?
Message-ID: <934@metapsy.UUCP>
Date: 3 Dec 89 15:17:57 GMT
Reply-To: sarge@metapsy.UUCP (Sarge Gerbode)
Organization: Metapsychology, Woodside, CA
Lines: 18