🚀 go-pugleaf

In <THOMAS.90Mar21100049@uplog.uplog.se>, thomas@uplog.se (Thomas Tornblom) writes:
>In article <1274@lpami.wimsey.bc.ca> lphillips@lpami.wimsey.bc.ca (Larry Phillips) writes:
>
>   Model       XT-1085
>   Interface    ST-506
>   Rec. method     MFM
>   Phys size      5.25 FH  
>   Capacity         71 meg  (the 85 meg figure is unformatted capacity)
>
>
>Note that these drives work OK with a 2.7 RLL controller. We tested
>a few with Adaptec ACB-4070 controllers. Will give you 50% more capacity
>or about 105 Mb.

Note also that if one of these drives does not work well with a 4070 (or any
other RLL controller), that you will have a hard time convincing the
manufacturer to do anything about it under warranty (unless the XT-1085 is
recognized by Maxtor as RLL capable).

As with other things of this nature, it will probably work, but you are on your
own for supprt.

-larry

--
Entomology bugs me.
+-----------------------------------------------------------------------+ 
|   //   Larry Phillips                                                 |
| \X/    lphillips@lpami.wimsey.bc.ca -or- uunet!van-bc!lpami!lphillips |
|        COMPUSERVE: 76703,4322  -or-  76703.4322@compuserve.com        |
+-----------------------------------------------------------------------+