Access PC zip cartridges on Mac

Thread View: comp.periphs

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by Tim Walker Tue, 19 Mar 1996 02:54

#1465

Author: Tim Walker
Date: Tue, 19 Mar 1996 02:54

23 lines
1279 bytes


Hi,

I have a SCSI zip drive, and cannot access PC cartridges with it.  I am
running PC Exchange 2.0.5 on a PowerMac 7500/100 with 32M RAM.  I have
Iomega Tools 4.2.1 and Iomega Driver 4.2.  I also have a parallel port
drive, and copied several files onto it from a PC, using a pre-formatted
PC cartridge.  I was able to copy successfully, and have been able access
the files, on the PP drive, from several different PCs.  When I put the
cartridge into the SCSI drive on my Mac, though, it ejects it
immediately.  I initially couldn't use Iomega Tools (I got an error - old
driver installed (???) ), but was able to after disabling RamDoubler. 
However, Iomega Tools just wants me to erase the cartridge and reformat as
a Mac cartridge.  If anyone can tell me what I need or am doing wrong,
please let me know.



Thank You,


Tim Walker

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads