Help needed on scanner setup (PBSCANNER)

Thread View: comp.periphs

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by Spin Wed, 25 Dec 1996 00:00

#3112

Author: Spin
Date: Wed, 25 Dec 1996 00:00

35 lines
1923 bytes

Hi guys,

 I need help on Epson Scanners. I have got the hardware from
a friend of mine but I couldn't make it work. I don't know much
about scanners and I'm probably doing something stupid. 

I just connected the scanner to the parallel port and downloaded the
drivers (EPSON TWAIN driver v2.51A) from the epson site but I couldn't
make the software acquire any image. It doesn't even connect to
the scanner because I got an error saying to check if the power
was on (sigh....). 

There are some switches on the scanner but I don't have any docs on
how the set them. The hardware is a flatbed epson gt-6500 and the 
drivers readme file lists it as a supported model.

Any help will be appreciated. If you please can reply also to my 
e-mail address would be helpful because I'm not a strong reader of
these newsgroups (paolo.bonetto@iol.it). 

Thanks again for any help you can provide.
Cheers.

--
Paolo

 "Ogni limite ha una pazienza."

			-- Toto' --

============================================
| paolo.bonetto@iol.it                     |
| http://fs001mi.iol.it/paolo.bonetto/     |
============================================

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads