🚀 go-pugleaf

In article <1992Dec21.110859.9834@leland.Stanford.EDU>, jimbo@leland.Stanford.EDU (Godfather of Soul) writes:
> 
> We're a little confused about the format of atalk.local.  (OK,
> we're rookies).  The man page gives the following example:
> 
>         # host's AppleTalk network, node, zone
>         55.1    6       "MY ZONE"
>         # bridge's AppleTalk network, node, and IP address
>         55.1    5       128.254.1.5
> 
> I assume the host refers to the unix machine running CAP.
> How do I find out it's Appletalk network, node and zone?


You ask your network administrator :-).

Net number. If it has an IP address which has the same
first-three-bytes as an IPTalk gateway, then the network number is the
same as configured into the IPTalk gateway for that IPTalk network
(aka subnet). If it is "on its own" (not the above case), then there
has to be an AppleTalk network number assigned by somebody, and you
have to be using atalkad/atalkatab. I'll assume you're not.

The zone name likewise.

The host's node number must be identical to the last byte of its IP
address, strange but true...

> I know the bridge's node and ip address, but how do I
> find out it's Appletalk network?

It is what is configured into it for its IPTalk network (NOT its
LocalTalk or EtherTalk network - these ones you can't predict what the
node number is going to be). Its node number (as above) has to be the
same as the LSByte of its IP address.

========================
Tom Evans  tom@wcc.oz.au
Webster Computer Corp P/L, 1270 Ferntree Gully Rd Scoresby, Melbourne 3179
Victoria, Australia 61-3-764-1100  FAX ...764-1179  A.C.N. 004 818 455

wcc@cup.portal.com, AppleLink: "WEBSTER.USA"
2109 O'Toole Avenue, Suite J SAN JOSE CA 95131 - 1303 CALIFORNIA
1-408-954-8054  FAX 1-408-954-1832  AppleLink WEBSTER.USA