Re: Problem with ARNS and MacSE

Article View: comp.protocols.appletalk

Article #3561

Back to comp.protocols.appletalk Previous Next

#3561

From: Hock Koon Lim
Date: Thu, 17 Dec 1992 04:30

25 lines
1525 bytes

In article <1gksn8INNahv@usenet.INS.CWRU.Edu> lim@po.CWRU.Edu writes:
>
>
>    I am unable to see any AppleTalk zone after I login to ARNS server
>with Async Atalk.  My MacSE is running MacOS 7.1 with MacTCP v1.1.1 loaded.
>I have no problem to run the "async" program on the ARNS server.  However,
>after the connection is make, there is not AppleTalk zones shown in the
>chooser.  I did try to install the "SHeap" extension but it doesn't help.
>I have no problem with the ARNS server  when I use it with a MacIIcx.
>
>

  Well, the MacSE serial port with ARNS would not work if the serial port speed 
is higher then 9600 bps.  Thanks for the answer from David Hornsby - "Anything 
above 9600 is dubious on an SE".   I set the serial
port speed to 9600 and everything is working fine now.


Thanks a lot,


-- 
Hock-Koon Lim, Information Network services
Case Western Reserve University; Cleveland, Ohio, USA  44106   
(216) 368-2982        lim@ins.cwru.edu

Technical Details

Message-ID: <1govq1INN4cs@usenet.INS.CWRU.Edu>

Path:

arc1-ca.pugleaf.net!sparky!uunet!cs.utexas.edu!zaphod.mps.ohio-state.edu!caen!spool.mu.edu!agate!usenet.ins.cwru.edu!merlion!lim

References: <1gksn8INNahv@usenet.INS.CWRU.Edu>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!sparky!uunet!cs.utexas.edu!zaphod.mps.ohio-state.edu!caen!spool.mu.edu!agate!usenet.ins.cwru.edu!merlion!lim
From: lim@merlion.ins.cwru.edu (Hock Koon Lim)
Newsgroups: comp.protocols.appletalk
Subject: Re: Problem with ARNS and MacSE
Date: 17 Dec 1992 04:30:57 GMT
Organization: Case Western Reserve University, Cleveland, OH (USA)
Lines: 25
Sender: lim@po.cwru.edu
Distribution: world
Message-ID: <1govq1INN4cs@usenet.INS.CWRU.Edu>
References: <1gksn8INNahv@usenet.INS.CWRU.Edu>
NNTP-Posting-Host: merlion.ins.cwru.edu

Reply to Parent Message