LaserWriter IIg problem

Article View: comp.protocols.appletalk

Article #3966

Back to comp.protocols.appletalk Previous Next

#3966

From: Jamey Maze
Date: Tue, 05 Jan 1993 14:47

18 lines
1141 bytes

A friend here is trying to install a LaserWriter IIg and is having some
trouble. When connected to the corporate Ethernet, we do not see the
printer. When put on a stand-alone LAN, we can see the printer. After
unpacking the printer, this person did send a PostScript job to the
printer (via LocalTalk) to set the zone. This was before the printer was
connected to the Ethernet. 

My question is does someone have a PostScript job that would either:

1) Reset the printer to its factory defaults, or

2) Print the current settings (e.g., zone, appletalk address, ethernet
address, active interfaces, etc.)

Thanks!

Jamey Maze
Oak Ridge National Lab

Technical Details

Message-ID: <1993Jan5.144716.6991@ornl.gov>

Path: arc1-ca.pugleaf.net!sparky!uunet!wupost!emory!cs.utk.edu!ornl!baloo.ctd.ornl.gov!jnm

Show Full Headers

Complete Article Headers

Newsgroups: comp.protocols.appletalk
Path: arc1-ca.pugleaf.net!sparky!uunet!wupost!emory!cs.utk.edu!ornl!baloo.ctd.ornl.gov!jnm
From: Jamey Maze <jnm@ornl.gov>
Subject: LaserWriter IIg problem
Message-ID: <1993Jan5.144716.6991@ornl.gov>
X-Xxmessage-Id: <A76F0998D5018039@baloo.ctd.ornl.gov>
X-Xxdate: Tue, 5 Jan 93 09: 47:04 GMT
Sender: usenet@ornl.gov (News poster)
Organization: Oak Ridge National Lab
X-Useragent: Nuntius v1.1.1d9
Date: Tue, 5 Jan 1993 14:47:16 GMT
Lines: 18