🚀 go-pugleaf

	I am attempting to place two fastpaths onto one backbone and have
    seperate zone names.  I can get the two fastpaths to work but they cannot
    see each others zones.  
    
	Below is the atalkatab file I boot the two fastpaths from.  The serving
    machine is a sun3 running kip 0188 and os3.4.  Fastpath1 is a fastpath4 and
    Torry is a fastpath2.  The fastpath4 was running K-star but it kept 
    crashing.  It is now running kip and seems to be acting fine.
    
	I have successfully added other zones (for the heck of it) on other 
    networks but I can't seem to get the hang of adding the second fastpath to 
    the same logical network as fastpath1 (KFP-4).  I have used the same zone 
    name too without any luck.  I'm just not sure what I'm missing.

							Thanks,
							    Mark Erikson
							    me@scubed.com
							    ucsd!scubed!me
							    (619) 453-0060

192.16.16.100	fastpath1
192.16.16.132	fastpath2


55.1    H	fastpath1     fastpath1		#S3 main ethernet
58.1    E	fastpath1     fastpath1
56.1    KC	fastpath1     fastpath1		#ACS Kinetics
        I192.16.16.0	L0			#ipbroad ipname
        I192.16.16.85	L0			#ipdebug ipfile
        L0 L0 L0 L0	S0 S0			#ipother atnetet unused
        LX0		S5      S26		#flags ipstatic ipdynamic
        S56.1	S55.1

#55.4	H	fastpath2	Torry		#Tried with and without
#58.2	E	fastpath2	Torry		#Tried with and without
#56.2	KC	fastpath2	Torry		#Tried this one also

56.2	K	fastpath2	Torry		#S3 main ethernet Torry Pines	
	I192.16.16.0	L0			#ipbroad ipname
	I192.16.16.85	L0			#ipdebug ipfile
	L0 L0 L0 L0	S0 S0			#ipother atnetet unused
	LX0		S5	S26		#flags ipstatic ipdynamic
#	S56.2	S55.4
	S56.2	S55.1				#I have tried both 55.4 and 55.1

#These work just fine
55.2	H	192.31.68.63	thinnet		#thinnet cap servers
55.3	H	192.31.70.20	sun4net		#thinnet cap servers