Article View: comp.protocols.appletalk
Article #6216Re: NCSA telnet (standalone) -- zones
From: Seth M Powsner
Date: Wed, 21 Feb 1990 12:46
Date: Wed, 21 Feb 1990 12:46
15 lines
1352 bytes
1352 bytes
I have used BYU/NCSA 2.3.1/MacTCP via AppleTalk through a Shiva NetBridge
then on through a Kinetics FastPath 4 using K-Start 7.0 and it does work.
There are some restrictions. The NetBridge privacy option has to be turned
OFF and MacTCP has to be set to use SERVER (the FastPath) assigned IP
Addresses. You may have trouble with Class C addressing (try specifying
Class B instead). I suspect you can use other Telnet versions.
The privacy option has to be off and you have to use FastPath assigned
IP Addresses to get around Name Binding Protocol incompatibilities. There's
a basic incompatibility with the way NBP is used to establish and maintain
the TCP session and the way the NetBridge works.
Seth M Powsner powsner.medinf@yccatsmtp.ycc.yale.edu
powsner@mcs.nlm.nih.gov
powsner@yalemed.bitnet
Technical Details
Message-ID:
<11502@nlm-mcs.arpa>Path:
arc1-ca.pugleaf.net!utzoo!attcan!uunet!wuarchive!rex!uflorida!haven!ncifcrf!nlm-mcs!powsnerReferences:
<AJK.90Feb21104756@tikvtt.tik.vtt.fi>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!wuarchive!rex!uflorida!haven!ncifcrf!nlm-mcs!powsner From: powsner@nlm-mcs.arpa (Seth M Powsner) Newsgroups: comp.protocols.appletalk Subject: Re: NCSA telnet (standalone) -- zones Keywords: Telnet AppleTalk NetBridge FastPath MacTCP KIP Message-ID: <11502@nlm-mcs.arpa> Date: 21 Feb 90 12:46:35 GMT References: <AJK.90Feb21104756@tikvtt.tik.vtt.fi> Reply-To: powsner.medinf@yccatsmtp.ycc.yale.edu (Seth M Powsner) Organization: Yale Univ Sch of Medicine Lines: 15