🚀 go-pugleaf

I seem to have a simple setup problem but just can't get it right.
I am trying to run NCSA Telnet with MacTCP. When I execute it, Telnet
brings up the intial logo window for a few seconds and then exits. I
think the problem is the MacTCP start up. Here is my configuration.

The net has two bridges. A Hayes interbridge and a Kinetics KFPS 4. The
KFPS 4 is running K-star vers. 8. I am using atalkad on a Sun.  My KFPS has

CONFIGURATION:
  Atalk Phase 2
  K-Star IP
  Atalk Phase 1
LocalTalk                   EtherTalk 2           Ethertalk 1
  Zone       *              Start      1          Zone       *
  Net #      0              End        1          Net        0
  Node #     220            Net        1          Node       195
                            Node       195

IP INFO
  FP Box     192.0.0.195
      (all else 0.0.0.0)
IP CLIENTS
  Dynamic 0 Static 0
ADMIN
  Host       192.0.0.7
IPTALK
  Zone       *
  Net        0
  Node       195

All other fields are 0

Options 4 and 17 are on.

My atalkatab has:
55.0	N0	192.0.0.0  	SpartaLH-Ether	#Laguna Eng, appletalk-in-IP
57.0	E	192.0.0.195	SpartaLH-ET	#Laguna Eng, ethertalk
56.0	KC	192.0.0.195	SpartaLH-4th-AT	#Laguna Eng, 4th floor localtalk
	I192.0.0.0	I192.0.0.7		#ipbroad ipname
	I192.0.0.7	L0			#ipdebug ipfile
	L0 L0 L0 L0	S57.0	S0  		#ipother atnetet ddprangestart
	LX0		S3	S40		#flags ipstatic ipdynamic
	S56.0		S55.0	"SpartaLH-Ether"#atneta atnete zonea

I set up MacTCP to be in the zone SpartaLH-4th-AT and gave it an address
of 192.0.0.196. The Mac host file has these entries

durin.sparta.com. A 192.0.0.7
mac.sparta.com. A 192.0.0.196

Lastly my config.tel for NCSA has these changes

zone="SpartaLH-4th-AT"
name=durin; hostip=192.0.0.7; nameserver=1

If anyone has any ideas I Thanks in advance.
-- 
Frank Halsema                           UUCP: durin!frankh             
SPARTA, Inc.                   		ARPA: frankh@durin.sparta.com
23041 de la Carlota, Suite 400
Laguna Hills Ca, 92653     (714) 768-8161 EXT 339  (714)583-9114 FAX