Re: SLIP for the Mac

Article View: comp.protocols.appletalk

Article #6224

Back to comp.protocols.appletalk Previous Next

#6224

From: Greg Satz
Date: Thu, 22 Feb 1990 06:31

5 lines
778 bytes

A version of NCSA Telnet 2.3 for the Macintosh with SLIP support can be 
retrieved from ftp.cisco.com via anonymous ftp. This software is completely unsupported. SLIP mode is enabled by specifying hardware=slipN (where N is the baud rate of the Mac modem port in bits per second, e.g. 9600).

Greg Satz
cisco

Technical Details

Message-ID: <15673@hercules.csl.sri.com>

Path:

arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!samsung!zaphod.mps.ohio-state.edu!usc!elroy.jpl.nasa.gov!ames!sparkyfs!hercules!cisco.com!satz

References: <90047.013212HXN@psuvm.psu.edu>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!samsung!zaphod.mps.ohio-state.edu!usc!elroy.jpl.nasa.gov!ames!sparkyfs!hercules!cisco.com!satz
From: satz@cisco.com (Greg Satz)
Newsgroups: comp.protocols.appletalk
Subject: Re: SLIP for the Mac
Message-ID: <15673@hercules.csl.sri.com>
Date: 22 Feb 90 06:31:13 GMT
References: <90047.013212HXN@psuvm.psu.edu>
Sender: usenet@csl.sri.com
Organization: cisco Systems, Inc., Menlo Park, Ca.
Lines: 5

Reply to Parent Message