solution for "cap60 doesn't work with ne0 interphase board"

Thread View: comp.protocols.appletalk

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by John C. Hardt Tue, 22 Dec 1992 22:14

#3485

Author: John C. Hardt
Date: Tue, 22 Dec 1992 22:14

24 lines
1587 bytes

> i have successfully gotten cap60 to work on various suns, all with le0
> ethernet interfaces, and SunOS 4.1.1 and 4.1.2.  when i try to put the
> software on one of our 4/690's with an interphase ethernet board
> (device is ne0), the software does not work.

the problem was with the interphase board not handling multicast
packets correctly.  djh@munnari.oz.au suggested this may be the
problem, and it was.  i talked with interphase, and they were already
hot onto the problem, and had a solution for me within a couple of
days.

the solution was to install version 2.1.2 of the NC software, and then
install the 2.1.2.p1 patch that fixes the multicast problem.  NC 2.1.2
requires SunOS 4.1.2 or 4.1.3.  i installed the software successfully
on a 4/690 running SunOS 4.1.2 and the cap software started working.
we have a 4/490 running 4.1.1 that i need to upgrade before being able
to put the new NC software on.

to get the new software for your interphase board, you can contact
interphase at 1-800-FAST-NET.

            John Hardt
         hardt@den.mmc.com
        Martin Marietta SLC

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads