NCSA can't connect using SLIP packet driver

Article View: comp.protocols.ibm

Article #509

Back to comp.protocols.ibm Previous Next

#509

From: Rick Groeneveld
Date: Thu, 19 Jul 1990 22:51

39 lines
1488 bytes

I have been trying to connect to our network using NCSA telnet
over the serial port with the SLIP packet driver interface.
Using the KA9Q Internet Protocol Package with the packet driver
works very well so I am assuming that the problem is in NCSA
telnet or my config.tel file. Has anybody else managed to get
this to work? Does anybody have any ideas? See my config.tel file
below. Please respond via email. Thanks in advance.

myname=laptop.gtisqr.UUCP
termtype="vt100"
myip=88.0.0.1
netmask=255.255.255.0
hardware=packet
ioaddr=6a
address=6
tek=yes
video=cga
bios=no
ftp=yes
rcp=yes
domain="gtisqr.uucp"
arptime=8
name = default
hostip=88.0.0.100
gateway=1
scrollback=400
erase=backspace
vtwrap=yes
crmap=4.3BSDCRNUL
contime=20
retrans=7
mtu=512
maxseg=512
rwin=512
--
Rick Groeneveld                         UUCP: {smart-host}!gtisqr!rick
Software Engineer                       Bell: (206) 742-9111
Global Technology Intl. Inc.
Mukilteo Washington.

Technical Details

Message-ID: <9007201146.AA21521@lilac.berkeley.edu>

Path:

arc1-ca.pugleaf.net!utzoo!attcan!uunet!midway!ux1.cso.uiuc.edu!brutus.cs.uiuc.edu!zaphod.mps.ohio-state.edu!sdd.hp.com!ucsd!ucbvax!gtisqr.UUCP!rick

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!midway!ux1.cso.uiuc.edu!brutus.cs.uiuc.edu!zaphod.mps.ohio-state.edu!sdd.hp.com!ucsd!ucbvax!gtisqr.UUCP!rick
From: rick@gtisqr.UUCP (Rick Groeneveld)
Newsgroups: comp.protocols.ibm
Subject: NCSA can't connect using SLIP packet driver
Message-ID: <9007201146.AA21521@lilac.berkeley.edu>
Date: 19 Jul 90 22:51:35 GMT
Sender: daemon@ucbvax.BERKELEY.EDU
Reply-To: Rick Groeneveld <fluke!gtisqr!rick@BEAVER.CS.WASHINGTON.EDU>
Organization: The Internet
Lines: 39