Isode on HP over X.25?

Article View: comp.protocols.iso.dev-environ

Article #702

Back to comp.protocols.iso.dev-environ Previous Next

#702

From: Ricky Leung
Date: Mon, 03 Jun 1991 01:26

17 lines
1366 bytes

We have an application running on ISODE 6.0 on a Sun 4 over SunLink
and would like to port the application to an HP running HPUX.  My 
question is:  does ISODE 6.0 support X.25 on the HP?  If so, how 
can I install (configure) ISODE 6.0 on the HP to run on X.25 (but 
not TCP/IP)?  I have looked at the two files, hpux.h and 
hpux.makefile, in the isode-6.0/config directory, but couldn't find 
any clue.

If ISODE 6.0 does not support X.25 on the HP, will the latest (ISODE
6.8?) or the coming ones support it?

Thanks,
Ricky.
Ricky Leung				    
Centre for Information Technology Research   Phone: +61 7 365-4321
The University of Queesnland		     Fax:   +61 7 365-4399
Queensland  4072, Australia		     Email: ricky@citrus.citr.uq.oz.au

Technical Details

Message-ID: <1991Jun3.012625.4837@brolga.cc.uq.oz.au>

Path:

arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!wuarchive!uunet!munnari.oz.au!bunyip.cc.uq.oz.au!brolga!citrus.citr.uq.oz.au!ricky

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!wuarchive!uunet!munnari.oz.au!bunyip.cc.uq.oz.au!brolga!citrus.citr.uq.oz.au!ricky
From: ricky@citrus.citr.uq.oz.au (Ricky Leung)
Newsgroups: comp.protocols.iso.dev-environ
Subject: Isode on HP over X.25?
Keywords: ISODE 6.0, HPUX, X.25
Message-ID: <1991Jun3.012625.4837@brolga.cc.uq.oz.au>
Date: 3 Jun 91 01:26:25 GMT
Sender: news@brolga.cc.uq.oz.au
Reply-To: ricky@citrus.citr.uq.oz.au (Ricky Leung)
Organization: CiTR, University of Queensland, Brisbane, Australia
Lines: 17
Nntp-Posting-Host: citrus.citr.uq.oz.au