Correct use of the SEL field of NSAP addresses

Article View: comp.protocols.iso

Article #1279

Back to comp.protocols.iso Previous Next

#1279

From: Greg Sawyers
Date: Thu, 17 Dec 1992 08:45

22 lines
1306 bytes

Hi folks,

I have a question about the SEL field of OSI NSAP addresses. I
know that it is used within End Systems to select between different
transport entities, but are there any standard values for it?

For example, I seem to remember reading that 0 is used to address
the network entity itself (i.e. the Network Entity Title). Are there
values for, say TP0-4?

Is there a standard or some other document that I should be looking 
at?

Thanks, 
Greg
 
-----------------------------------------------------------------------
Greg Sawyers                              Internet: g.sawyers@trl.oz.au
Telecom Australia Research Laboratories		 Phone: +61 3 253 6454
P.O. Box 249 Clayton, Victoria 3168,		   Fax: +61 3 253 6362
Australia                        
X400:  g=greg s=sawyers ou=trl o=telecom p=telecom006 a=telememo c=au

Technical Details

Message-ID: <1992Dec17.084512.18550@trl.oz.au>

Path: arc1-ca.pugleaf.net!sparky!uunet!munnari.oz.au!titan!trl.OZ.AU!sawyers

Show Full Headers

Complete Article Headers

Newsgroups: comp.protocols.iso
Path: arc1-ca.pugleaf.net!sparky!uunet!munnari.oz.au!titan!trl.OZ.AU!sawyers
From: sawyers@trl.OZ.AU (Greg Sawyers)
Subject: Correct use of the SEL field of NSAP addresses
Message-ID: <1992Dec17.084512.18550@trl.oz.au>
Followup-To: comp.protocols.iso
Sender: root@trl.oz.au (System PRIVILEGED Account)
Reply-To: g.sawyers@trl.oz.au
Organization:  Telecom Australia Research Laboratories
Date: Thu, 17 Dec 1992 08:45:12 GMT
Lines: 22