🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Thread View: comp.protocols.iso
3 messages
3 total messages Started by roseberry Wed, 04 Nov 1992 21:05
Obtaining X.25 Numbers for Private Net
#42
Author: roseberry
Date: Wed, 04 Nov 1992 21:05
11 lines
627 bytes
	We are in the process of privatizing our X.25 network.
	I know Sprintnet's addresses start with 3110 and that
	networks in the US usually start with 31xx.  Where would
	we apply to get our own network number assigned ?

	Thanks for any pointers.

	- Bert Roseberry
	  US Coast Guard
	  roseberry@taney.uscghq.uscg.mil
Re: Obtaining X.25 Numbers for Private Net
#890
Author: Warwick Hunter
Date: Thu, 05 Nov 1992 10:47
10 lines
829 bytes
All X.25 DTE addresses and telephone numbers are allocated according to 
CCITT standard X.121. All I can suggest is that you contact the CCITT.
Perhaps your local telephone company can suggest where you might turn.

--

Warwick Hunter.
Networks and Communications,
Digital Equipment Corporation,
Bond University QLD Australia.
Re: Obtaining X.25 Numbers for Private Net
#891
Author: Ducks? Why do they have ducks?
Date: Thu, 05 Nov 1992 16:40
38 lines
2620 bytes
In article <1992Nov4.160542.88@taney.uscghq.uscg.mil>, roseberry@taney.uscghq.uscg.mil writes...
> 
>	We are in the process of privatizing our X.25 network.
>	I know Sprintnet's addresses start with 3110 and that
>	networks in the US usually start with 31xx.  Where would
>	we apply to get our own network number assigned ?
> 

Private X.25 networks don't have assigned network numbers.  The number
you're thinking of is an X.121 address.  X.121 addresses begin with a
DNIC, Data Network Identification Code.  DNICs for the United States
are passed out by either Dep't of State or the FCC, I can't remember
which.  These folks are working from allocations made by the CCITT. 
However, you can't have one, because those are only for public
networks.  Really, you don't need one, anyway.  It's only useful if you
connect to a public X.25 network.

So, you say, "but we do want to connect to a public X.25 network."  In
that case, the United States has a thing called "Shared DNICs," which was
set up by the FCC and ANSI as part of an inquiry made a couple of years ago
when we noticed that we were running out of numbers.  Under the Shared
DNIC principle, you get a range of X.25 numbers under your public network
provider DNIC.  Tough if you want to change providers.  

So, unless you have folks OUT of your X.25 network who need to make data
connections (i.e., not PAD connections) INTO your X.25 network, I wouldn't
bother.  

Now, if you were the Canadian Coast Guard, things would be different...

Another possibility for you is to grab one of the "ships at sea" DNICs,
which I've never understood what they were for, but if they apply to
anyone, they might apply to you (look in the back of X.121 to see).  

Joel M Snyder, 1103 E Spring Street, Tucson, AZ, 85719 
Phone: 602.882.4094 (voice) .4095 (FAX) .4093 (data)
BITNET: jms@Arizona  Internet: jms@arizona.edu  SPAN: 47541::telcom::jms
Yow!  Am I in Milwaukee?
Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads