Re: SNMP (adding functionality)

Article View: comp.protocols.misc

Article #541

Back to comp.protocols.misc Previous Next

#541

From: Tait Cyrus
Date: Tue, 29 Dec 1992 22:39

15 lines
1289 bytes

>Anything that provides the
>information I need (load avg, maxmem), or at least describes how to add
>the functionality to existing srcs?

I guess I should add I would need to know how to add to a mib specification
so some of the PD tools would understand how to obtain this information
(for example which numbers I can/should use without screwing other people up).

Thanks again...

-- 
W. Tait Cyrus                   Software Engineer
Convex Computer Corporation     cyrus@convex.com
2075 Research Parkway Suite B   719-594-4900 ext 41
Colorado Springs, CO 80920

Technical Details

Message-ID: <1992Dec29.223902.20130@news.eng.convex.com>

Path: arc1-ca.pugleaf.net!sparky!uunet!spool.mu.edu!darwin.sura.net!convex!convex!cyrus

References: <1992Dec29.215905.11512@news.eng.convex.com>

Show Full Headers

Complete Article Headers

Newsgroups: comp.protocols.misc
Path: arc1-ca.pugleaf.net!sparky!uunet!spool.mu.edu!darwin.sura.net!convex!convex!cyrus
From: cyrus@convex.com (Tait Cyrus)
Subject: Re: SNMP (adding functionality)
Sender: usenet@news.eng.convex.com (news access account)
Message-ID: <1992Dec29.223902.20130@news.eng.convex.com>
Date: Tue, 29 Dec 1992 22:39:02 GMT
References: <1992Dec29.215905.11512@news.eng.convex.com>
Nntp-Posting-Host: magnum.convex.com
Organization: Engineering, CONVEX Computer Corp., Colorado Springs, CO., USA
X-Disclaimer: This message was written by a user at CONVEX Computer
              Corp. The opinions expressed are those of the user and
              not necessarily those of CONVEX.
Lines: 15

Reply to Parent Message