Group III Fax Protocol

Thread View: comp.protocols.misc

4 messages

[T] Back to Threads [V] Tree View [G] Group Articles

4 total messages Started by Guy Cox Wed, 10 Oct 1990 15:24

#293

Author: Guy Cox
Date: Wed, 10 Oct 1990 15:24

15 lines
754 bytes

Can someone point me in the direction of the transmission
protocol for Group III fax? Can a plain vanilla 4800 or 9600
baud modem be used ?

--
//
//Remember; Tuesday is Soylent green day!
//

Guy O. Cox, Jr.  
Software Productivity Consortium.
2214 RockHill Rd
Herndon, VA 22090
703-742-7219
cox@software.org

Re: Group III Fax Protocol

#298

Author: Amanda Walker
Date: Sun, 14 Oct 1990 05:06

20 lines
1252 bytes

In article <1701@software.software.org> cox@software.org (Guy Cox) writes:
>Can someone point me in the direction of the transmission
>protocol for Group III fax? Can a plain vanilla 4800 or 9600
>baud modem be used ?

Group III FAX uses CCITT (European) modem standards, which differ from U.S.
modem standards.  What you want is the CCITT "Blue Book" covering
recommendations T.0-T.60-something, which ha all of the FAX standards in
it, among a bunch of other stuff.  CCITT standards are available from
Omnicom, Inc. in Vienna, VA.  I don't have their number or address handy,
but if all else fails you can probably get it from Directory Assistance
for area code 703...

Good Luck,

-- 
Amanda Walker <amanda@visix.com>
Visix Software Inc.
--
Entropy requires no maintenance.

Re: Group III Fax Protocol

#300

Author: Edward Vielmetti
Date: Sun, 14 Oct 1990 20:32

9 lines
910 bytes

In article <1701@software.software.org> cox@software.org (Guy Cox) writes:

   Can someone point me in the direction of the transmission
   protocol for Group III fax? Can a plain vanilla 4800 or 9600
   baud modem be used ?

see also alt.fax and the alt.fax archives in nisca.ircc.ohio-state.edu.

--Ed

Re: Group III Fax Protocol

#312

Author: Ron Holt
Date: Thu, 18 Oct 1990 18:01

11 lines
911 bytes

In article <2717F23F.4372@intercon.com> amanda@visix.com (Amanda Walker) writes:
>CCITT standards are available from
>Omnicom, Inc. in Vienna, VA.  I don't have their number or address handy,
>but if all else fails you can probably get it from Directory Assistance
>for area code 703...

I just received information from Omnicom on ordering OSI documents.  They
sent me this information after calling them at 703-281-1135.
-- 
Ron Holt	ron@Eyring.COM  uunet!lanai!ron
Eyring Inc.	+1 801-375-2434 x434

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads