Talking to Ethernet Cards the easy way ? Help

Article View: comp.protocols.pcnet

Article #3

Back to comp.protocols.pcnet Previous Next

From: Chris WIGNALL
Date: Wed, 05 Aug 1992 06:39

27 lines
1495 bytes

Hi, 
 
I'm a postgraduate student at La Trobe Uni Bundoora Australia.
I'm developing a digital video monitoring system, that will be using a
small LAN (Ethernet)  to transmit  images from one PC to another.
The images will be captured by a CCD camera attached to the
transmitting PC. Initially I want to test the system using just 2 PC's
connected by an Ethernet cable. 

My question is what is the easiest way to send data (ie the images)
between the two computers ? 
Can I talk to the packet drivers directly ? 
Or should I use the Telnet source ?
Basically I just want to start at the bottom and skip all the high
level protocols.

Note I will be using Turbo C.

Thanks in advance


        ---------------------------------------------------------
 	| Chris Wignall						|
	| Department of Electronic and Communication Engineering|
	| La Trobe University				        |	
	| Bundoora Australia				        |
	---------------------------------------------------------

Technical Details

Message-ID: <1992Aug5.063929.9802@latcs1.lat.oz.au>

Path: arc1-ca.pugleaf.net!sparky!uunet!munnari.oz.au!ariel!ucsvc.ucs.unimelb.edu.au!lugb!latcs1!wignall

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!sparky!uunet!munnari.oz.au!ariel!ucsvc.ucs.unimelb.edu.au!lugb!latcs1!wignall
From: wignall@latcs1.lat.oz.au (Chris WIGNALL)
Newsgroups: comp.protocols.pcnet,comp.protocols.tcp-ip.ibmpc,comp.sys.ibm.pc.misc,comp.protocols.ibm,sci.electronics
Subject: Talking to Ethernet Cards the easy way ? Help
Message-ID: <1992Aug5.063929.9802@latcs1.lat.oz.au>
Date: 5 Aug 92 06:39:29 GMT
Sender: wignall@latcs1.lat.oz.au (Chris WIGNALL)
Organization: Comp Sci, La Trobe Uni, Australia
Lines: 27