🚀 go-pugleaf

I have two WorldBlazer's wich I want to use to run PPP.
I was successfull in setting the modems up in such a way that the one I use
for dial in works fine when I call using a T2500.
But if I use the other WB to dial out the chat program can not communicate
well with the modem and the call aborts before the modem goes on hook.
I tried to dial out with tip, the version that comes with slip, and the
dialer get confused as well.
Is anybody using this modem with better luck than me?
I should mention that the only way I can dial out using the WB is with kermit.

This is the configuration of the dialing out modem:

WorldBlazer - SA - Version LA5.00W- Active Configuration
 B1  E0  L2  M1  Q0  T   V1  X1  Y0 
&C1 &D3 &G0 &J0 &L0 &Q0 &R3 &S1 &T4 &X0 
S000=0   S001=0   S002:128 S003=13  S004=10  S005:254 S006=2   S007=40 
S008=2   S009=6   S010=14  S011=70  S012=50  S018=0   S025=5   S026=1  
S038=0   S041=0   S045=0   S046=0   S047=4   S048=0   S050=0   S051:254
S056=17  S057=19  S058:2   S059=0   S060=0   S061:0   S062=15  S063=0  
S064=0   S068=255 S069=0   S090=0   S092=0   S093=8   S094=1   S100=0  
S104=0   S105=1   S111:0   S112=1   S151=4   S155=0   S180=2   S181=1  
S183=25  S190:0   S191=7   S253=10  S254=255 S255=255 
OK


Thanks for any help

Laura Compagnoni
laura@alumni.colorado.edu