Slip: Help Sought

Thread View: comp.protocols.ppp

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by Geetha Madhavan Tue, 18 Aug 1992 08:04

#44

Author: Geetha Madhavan
Date: Tue, 18 Aug 1992 08:04

39 lines
1631 bytes


I am trying to setup slip between a Telebit WorldBlazer and
a Fastcomm 9600. I have the following script

#!/bin/sh
while true ; do
	 ./tip -s slip >/dev/console 2>&1
	 sleep 100
done

and slip is in my /etc/remote 

slip:sa= xxx.xx.xx.xx:da=yyy.yy.yy.y:sm=255.255.0.0:st=slip:rt:\
        :dv=/dev/cua0:br#19200:du:at=hayes:pn=xxxxxxx:ls=login.script:

(ofcourse the xxx and yyy are completed in the entry)
(sa = local address and da is destination)

The modem dials out (from a SUN IPC) with the Telebit WB and
logs into a sparc2 with a Fastcomm.

The modems connect, the following message comes at my Home
terminal (yes! I have the kernal configured ...etc),

[Logging in...]
Aug  9 23:13:21 benjy vmunix: slip0: coming up
add net 0: gateway xxx.xx.xx.xx
[SLIP running]

Subsequently nothing happens, ping da (the yyy.yy.yy.yy )
doesn't work. Do I have to run something on the destination address
to make the slip to connect? The systems remain connected! I feel
I am very close to setting up slip! Any help would be appreciated.
Please respond by email.

Regards

... Geetha Madhavan

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads