Dialin to SPARC2 ?

Thread View: comp.protocols.ppp

3 messages

[T] Back to Threads [V] Tree View [G] Group Articles

3 total messages Started by Jamey Maze Wed, 19 Aug 1992 14:10

#48

Author: Jamey Maze
Date: Wed, 19 Aug 1992 14:10

37 lines
1889 bytes

I'm trying to get in a position to test some PPP software, but haven't
made it to first base yet. I've got a UDS V.32 modem attached to ttya on
a SPARC2. The modem was initialized with the command 

	AT &F Q2 &C1 &D3 &S1 \N \Q3 \V1 &W

The cable is a standard off-the-shelf ribbon cable with all pins wired
straight through.

I defined the ttya line in /etc/ttytab like:

# name  getty                           type            status  comments
ttya    "/usr/etc/getty std.19200"      dialup          on # UDS-V32

I can see the getty running with ps -agux:

USER   PID %CPU %MEM   SZ  RSS TT STAT START  TIME COMMAND
root   393  0.0  0.0   40    0 ?  IW   17:32   0:00 - std.19200 ttyb (getty)

When I dial into the SPARC2 from a Mac with an identical UDS modem, the
modems sync up, and I see the message "CONNECT 19200" on the Mac
followed by some garbage. The getty immediately dies.

Would anyone have any ideas?

Thanks!

--
Jamey Maze                 | Computing & Telecommunications Division
Oak Ridge National Lab     | Advanced Technology Group
P.O. Box 2008, MS-6238     | Internet: jnm@ornl.gov 
Oak Ridge, TN 37831-6238   | 615/574-6355, FAX 615/574-9646 

"The defense of individual rights has reached such extremes as to 
 make society as a whole defenseless against certain individuals.
 It is time, in the West, to defend not so much human rights as
 human obligations." - Aleksandr Solzhenitsyn

Re: Dialin to SPARC2 ?

#47

Author: Jamey Maze
Date: Wed, 19 Aug 1992 15:33

10 lines
971 bytes

In article <1992Aug19.141021.11580@ornl.gov>, jnm@tdum.CTD.ORNL.GOV (Jamey Maze) writes:
|> I'm trying to get in a position to test some PPP software, but haven't
|> made it to first base yet. I've got a UDS V.32 modem attached to ttya on
|> a SPARC2. The modem was initialized with the command 
|> 
|> 	AT &F Q2 &C1 &D3 &S1 \N \Q3 \V1 &W

Okay, I backed up and connected to terminals to the modems and it fails
the same way -- lots of garbage. So it looks like I"ve not got the
modems configured correctly...

Re: Dialin to SPARC2 ?

#53

Author: Uwe Hilkert
Date: Fri, 21 Aug 1992 06:20

33 lines
1529 bytes

jnm@tdum.CTD.ORNL.GOV (Jamey Maze) writes:
: I'm trying to get in a position to test some PPP software, but haven't
: made it to first base yet. I've got a UDS V.32 modem attached to ttya on
: a SPARC2. The modem was initialized with the command 
: 
: 	AT &F Q2 &C1 &D3 &S1 \N \Q3 \V1 &W
: 
: [ stuff deleted]

Do You have made Changes to your EEProm Setup ?
The SUNs normaly ignores CD Line from Modem so the getty doesen't get the Connection!

This is a cutout of my EEprom printout.(I'm using a 630MP and Dialin UUCP)

.....
.....
keyboard-click?=false
keymap=
ttyb-rts-dtr-off=false
ttyb-ignore-cd=false
ttya-rts-dtr-off=false
ttya-ignore-cd=true
ttyb-mode=19200,8,n,1,h
ttya-mode=19200,8,n,1,s
fcode-debug?=false
.....
.....
-- 
  #   ###  ###  | Uwe Hilkert, Abteilung INS/GT, ABB  Installationen GmbH
 # #  #  # #  # | Wallstadter Strasse 59,  D-W-6802 Ladenburg
#   # ###  ###  | Phone....: +49 6203 71 2257,  Fax.......: +49 6203 3993
##### #  # #  # | E-Mail...: uwe@abbins.ladenburg.abb.de, uwe@abbins.uucp
#   # ###  ###  | Building automation ---> GA2000 <--- Gebaeudeautomation

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads