SMC91C2 Ethernet card & Trumpet

Thread View: comp.protocols.tcp-ip.ibmpc

2 messages

[T] Back to Threads [V] Tree View [G] Group Articles

2 total messages Started by Mike Prettejohn Fri, 21 Jul 1995 00:00

#7433

Author: Mike Prettejohn
Date: Fri, 21 Jul 1995 00:00

9 lines
1003 bytes

I'd like to try out Trumpet Winsock over Ethernet. I have a Dell Latitude
with an SMC91C2 ethernet card. Can anyone point me to a suitable packet
driver for this combination, or suggest another solution?

Mike
-- 
Mike Prettejohn
mhp@netcraft.co.uk  Phone +44 1225 447500  Fax +44 1225 448600
Netcraft  Rockfield House  Granville Road Bath BA1 9BQ  England

Re: SMC91C2 Ethernet card & Trumpet

#7435

Author: John P. Lybrand
Date: Fri, 28 Jul 1995 00:00

18 lines
1351 bytes

Mike Prettejohn <mhp@netcraft.co.uk> wrote:

>I'd like to try out Trumpet Winsock over Ethernet. I have a Dell Latitude
>with an SMC91C2 ethernet card. Can anyone point me to a suitable packet
>driver for this combination, or suggest another solution?

I was successful using the ODI drivers supplied on the Advanced Port
Replicator (APR) disk and using the ODIPKT shim. I also tried the NDIS
drivers since I was running WfWG; however, it would lock up every
time. The APR disk is availble at Dell's Web site:

http://www.dell.com/cgi-bin/readme/drivers/apr-net.exe

If you don't need NDIS (for NetBEUI) or ODI (for IPX) then the packet
driver is probably the best way to go. I do not know if there is a
packet driver on that disk.

Good Luck

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads