🚀 go-pugleaf

I need to break a Class C network into subnets, using each subnet in a 
locations which are connected basically as follows:

+----+    +------+                         +------+   +----+
| W1 |----|  S1  |-------------------------|  S2  |---| W2 |
+----+    +------+                         +------+   +----+

|            | |                             | |           |
+------------+ +-----------------------------+ +-----------+
 Network 1,             Network 2                 Network 1,
 Subnet A                                         Subnet B

111.111.111.2                                    111.111.111.254

W1 and W2 are PC's with an IP address in different subnets of Class C network
1. S1 and S2 are Netware servers which are connected to a backbone with
addresses in Class C Network 2. (The actual IP addresses are made up; I know
that .2 and .254 are not valid the way subnetting works.)

My question is whether another server on the backbone (call it S3) will be
able to figure out that to get to 111.111.111.2 you need to go through server
S1, but that 111.111.111.254 is accessible only through server S2.

I would try this, but the servers in question are inconveniently far apart,
and this looks like a pretty simple "yes-or-no" proposition. 

Thanks for any responses (that pertain to my question, that is!)


 
-- 
*-----------------------------------------------------------------------------*
*  Mark C. Landin					Northeastern St. Univ *
*  landin@cherokee.nsuok.edu					Tahlequah, OK *
*   "Living in the pools, they soon forget about the sea" - Neil Peart, RUSH  *