Article View: comp.protocols.time.ntp
Article #777ntp server setup
From: David A. Rageth
Date: Wed, 08 May 1991 22:33
Date: Wed, 08 May 1991 22:33
19 lines
1228 bytes
1228 bytes
Question:
I cannot seem to get an ntp server to sync up (even after a half of a day).
If you were to set up two servers (no external clock source) that could
service as stratum 2 or stratum 3 servers and there will be two of these
servers, what type of configuration file (ntp.conf) would be needed to
have these servers sync up with a couple of ntp servers off of the internet.
All I need is a sample configuration.
x++++++++++++++++++++++++++++++++++++++x
x David Rageth x
x email : dave@mmc.com x
x voice : (303)977-4584 x
x USMail: Martin Marietta x
x P.O. Box 179 m/s 9570 x
x Denver, Colorado x
x 80201 x
x++++++++++++++++++++++++++++++++++++++x
Technical Details
Message-ID:
<9105082233.AA02597@netmgr.MMC.COM>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!uunet!stanford.edu!agate!ucbvax!MMC.COM!daveShow Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!uunet!stanford.edu!agate!ucbvax!MMC.COM!dave From: dave@MMC.COM (David A. Rageth) Newsgroups: comp.protocols.time.ntp Subject: ntp server setup Message-ID: <9105082233.AA02597@netmgr.MMC.COM> Date: 8 May 91 22:33:00 GMT Sender: daemon@ucbvax.BERKELEY.EDU Distribution: inet Organization: The Internet Lines: 19