VxWorks NTP: MVME167 problem (Prev time adj didn't complete)

Article View: comp.protocols.time.ntp

Article #834

Back to comp.protocols.time.ntp Previous Next

#834

From: Tom Nicinski
Date: Mon, 14 Dec 1992 16:37

10 lines
1067 bytes

I'm using the VxWorks port of NTP on both a Motorala MVME147 and MVME167.  I've
gotten the 147 to work reasonably well.  But, on the 167, after 15 minutes or
so, I constantly get:

    Previous time adjustment didn't complete

Since I'm not familiar with NTP, has anyone else seen this problem and solved
it.  Our clock rate is 1000 Hz on both machines.  NTPD is the only "user" task
operating on the machines (during our NTP tests), so there's nothing really to
steal the CPU away from timekeeping.

Technical Details

Message-ID: <1gid8vINNepi@fnnews.fnal.gov>

Path:

arc1-ca.pugleaf.net!sparky!uunet!haven.umd.edu!darwin.sura.net!zaphod.mps.ohio-state.edu!pacific.mps.ohio-state.edu!linac!mp.cs.niu.edu!fnnews.fnal.gov!fndaud.fnal.gov!nicinski

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!sparky!uunet!haven.umd.edu!darwin.sura.net!zaphod.mps.ohio-state.edu!pacific.mps.ohio-state.edu!linac!mp.cs.niu.edu!fnnews.fnal.gov!fndaud.fnal.gov!nicinski
From: nicinski@fndaud.fnal.gov (Tom Nicinski)
Newsgroups: comp.protocols.time.ntp
Subject: VxWorks NTP: MVME167 problem (Prev time adj didn't complete)
Date: 14 Dec 1992 16:37:51 GMT
Organization: Fermi National Accelerator Laboratory, Batavia IL
Lines: 10
Distribution: world
Message-ID: <1gid8vINNepi@fnnews.fnal.gov>
NNTP-Posting-Host: fndaud.fnal.gov
Keywords: VxWorks MVME167