Article View: comp.robotics
Article #1016miniboard PCB's - prices
From: peter dunster
Date: Wed, 30 Sep 1992 00:59
Date: Wed, 30 Sep 1992 00:59
58 lines
3326 bytes
3326 bytes
Well, all the details are finished, the last prices in, so now we get down
to the nitty-gritty. The last price I was waiting for was the cost of a copy
of the artwork from Douglas Electronics, the company who made the original
boards for Fred Martin. Unfortunately (for me) I omited to tell them not to
send it by the most expensive means they could find...the couriers charged
me US$70!!. I think by Air Mail it would have cost ~US$7 and that is all I
will put on the boards, I will wear the rest.
So to the total costs, this is the way it worked out: ( in A$ )
Item Total Per Board
=========================================================================
Tooling 210 2.1
Boards 5.0
Artwork 68 0.68
Artwork postage 10 0.10
Board postage (to Wollongong) 12 0.12
============
TOTAL A$ 8.00
============
To convert to US$, A$8.00 * 0.73 = US$5.84ea.
Those of you who placed tentative orders for boards over the last few weeks,
if you would like to confirm your order by sending me the money I can start
to get things moving. I would like to place the order on 12th October, that
should be long enough for Air Mail from anywhere in the world to reach me.
The boards will take less than 2 weeks to make so I should have dispatched
them by the 26th October.
Payment details: All payments, cheques or transfers, must be in
Australian Dollars, and for A$8.00 per board ordered plus A$5.65 to cover
postage and packing to you (outside Aus only). Payments can be made by cheque
or bank transfer, cheques should be sent to me at the address below on my
signature.
If you prefer bank transfer, the bank details are:
National Australia Bank
University Branch
Northfields Ave. Branch No. 082-886
Wollongong Account No. 03-811-0002
N.S.W. 2500.
Please also include your name and the word "PCB" so the accounts section
can identify it, put it in the right account and advise me.
If you have any queries or problems, please send me an Email.
If you have not placed a tentative order but wish to buy some boards, please
notify me by Email first.
Cheers
Pete
====================================================================
Pete Dunster | Email p.dunster@uow.edu.au
Dept. Mech. Eng. | Tel +61 42 213597
University of Wollongong | Fax +61 42 213101
Northfields Ave. |
Wollongong, N.S.W. 2522 |
AUSTRALIA |
====================================================================
Technical Details
Message-ID:
<1992Sep30.005926.26351@cc.uow.edu.au>Path:
arc1-ca.pugleaf.net!sparky!uunet!haven.umd.edu!darwin.sura.net!sgiblab!munnari.oz.au!sol.deakin.OZ.AU!cs.uow.edu.au!cc.uow.edu.au!pdunsterShow Full Headers
Complete Article Headers
Newsgroups: comp.robotics Path: arc1-ca.pugleaf.net!sparky!uunet!haven.umd.edu!darwin.sura.net!sgiblab!munnari.oz.au!sol.deakin.OZ.AU!cs.uow.edu.au!cc.uow.edu.au!pdunster From: pdunster@cc.uow.edu.au (peter dunster) Subject: miniboard PCB's - prices Message-ID: <1992Sep30.005926.26351@cc.uow.edu.au> Organization: University Of Wollongong Date: Wed, 30 Sep 92 00:59:26 GMT Lines: 58