miniboard PCB's

Article View: comp.robotics

Article #1028

#1028

From: peter dunster
Date: Fri, 02 Oct 1992 05:48

28 lines
1308 bytes

I have had a few questions about methods of payment for the PCB's, thought I'd
better post to the group to clarify.
Payment may be by EFT. cheque or money order, so long as it is in
Australian dollars. For a cheque to be made out in Australian dollars it must
be purchased from a bank. Almost any bank will do this. In this way the bank
can calculate the current exchange rates and do everything for you.

As to the prices, the postal charge of A$5.65 is a one off charge PER ORDER 
not per board. The A$8.00 is per board.
 i.e. If you ordered 5 boards you should send me (5 * 8) + 5.65 = A$45.65
      (aprox. US$33.33).

Humblest apologies if my previous posting was a little ambiguous, if you have 
any questions please Email me.  There may still be time for last minute
orders.

My postal address is:
			Pete Dunster
			Dept. Mech. Engineering.
			University of Wollongong
			Northfields Avenue
			Wollongong
			N.S.W. 2522
			AUSTRALIA

Cheers

Pete

Technical Details

Message-ID: <1992Oct2.054835.20836@cc.uow.edu.au>

Path: arc1-ca.pugleaf.net!sparky!uunet!munnari.oz.au!sol.deakin.OZ.AU!cs.uow.edu.au!cc.uow.edu.au!pdunster

Show Full Headers

Complete Article Headers

Newsgroups: comp.robotics
Path: arc1-ca.pugleaf.net!sparky!uunet!munnari.oz.au!sol.deakin.OZ.AU!cs.uow.edu.au!cc.uow.edu.au!pdunster
From: pdunster@cc.uow.edu.au (peter dunster)
Subject: miniboard PCB's
Message-ID: <1992Oct2.054835.20836@cc.uow.edu.au>
Organization: University Of Wollongong
Date: Fri, 2 Oct 92 05:48:35 GMT
Lines: 29