Re: HERO 2000

Article View: comp.robotics

Article #1097

#1097

From: Sarmad Adnan
Date: Wed, 09 Jan 1991 01:32

18 lines
986 bytes

If it does, then it has passed the self test. Now you need a null modem 
cable. to connect. and make sure you setup the correct baud rate on the
hero keypad.         
After that you need to punch "RESET" "RS232" "BASIC" if all is well 
the terminal will give you an indication of HERO-2000 basic being 
ready. 

If you have specific questions send me Email. 

-adnan
.


--

                 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
                  Sarmad Adnan (adnan@rice.edu)
                 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Technical Details

Message-ID: <1991Jan9.013246.2112@rice.edu>

Path:

arc1-ca.pugleaf.net!utzoo!censor!geac!torsqnt!news-server.csri.toronto.edu!cs.utexas.edu!usc!snorkelwacker.mit.edu!mit-eddie!uw-beaver!rice!screech.rice.edu!adnan

References: <9101061917.aa18056@BONNIE.ICS.UCI.EDU>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!censor!geac!torsqnt!news-server.csri.toronto.edu!cs.utexas.edu!usc!snorkelwacker.mit.edu!mit-eddie!uw-beaver!rice!screech.rice.edu!adnan
From: adnan@screech.rice.edu (Sarmad Adnan)
Newsgroups: comp.robotics
Subject: Re: HERO 2000
Message-ID: <1991Jan9.013246.2112@rice.edu>
Date: 9 Jan 91 01:32:46 GMT
References: <9101061917.aa18056@BONNIE.ICS.UCI.EDU>
Sender: news@rice.edu (News)
Organization: Rice University
Lines: 18

Reply to Parent Message