Article View: comp.robotics
Article #1241Re: Stepper motor controller.
From: Willie Smith
Date: Fri, 29 Mar 1991 15:12
Date: Fri, 29 Mar 1991 15:12
15 lines
1207 bytes
1207 bytes
In article <1991Mar28.200504.17586@techbook.com>, tedpan@techbook.com (Teddy Panarto) writes...
>I need a good stepper motor controller (i.e. a dedicated chip that understands
>ASCII command, programmable acceleration slope, speed, etc.)
Try Integrated Micro Systems (IMS), they have exactly this kind of thing as
well as evaluation boards (the chip and support circuits and drive
transistors for small steppers all in one). They have a bunch of different
options, so give them a call at (800) 528-9185 to get literature and figure
out which one you want.
Willie Smith
smith@sndpit.enet.dec.com
smith%sndpit.enet.dec.com@decwrl.dec.com
{Usenet!Backbone}!decwrl!sndpit.enet.dec.com!smith
Technical Details
Message-ID:
<1017@sousa.enet.dec.com>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!swrinde!elroy.jpl.nasa.gov!decwrl!pa.dec.com!rust.zso.dec.com!shlump.nac.dec.com!sousa.enet.dec.com!sndpit.enet.dec.com!smithShow Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!swrinde!elroy.jpl.nasa.gov!decwrl!pa.dec.com!rust.zso.dec.com!shlump.nac.dec.com!sousa.enet.dec.com!sndpit.enet.dec.com!smith From: smith@sndpit.enet.dec.com (Willie Smith) Newsgroups: comp.robotics Subject: Re: Stepper motor controller. Message-ID: <1017@sousa.enet.dec.com> Date: 29 Mar 91 15:12:28 GMT Sender: newsa@sousa.enet.dec.com Distribution: usa Organization: Digital Equipment Corporation Lines: 15