PUMA 560 AND IBM PC/XT

Article View: comp.robotics

Article #653

#653

From: Pei-chieh Chin
Date: Wed, 29 Aug 1990 15:12

15 lines
1152 bytes

	Hi!  I am working on a project which needs to connect a PUMA 560
robot and a supervisory computer.  So far, I try to use a IBM PC/XT as a
supervisor.  The PUMA that I have is a pretty old one which has a
RS-232C serial interface.  The problem that I have is when "ENABLE NETWORK"
command is issued in VAL-II, the PC can receive a "start" message according
to DDCMP format.  However, the PUMA wouldn't response after PC transmitted
a "start acknowledgement" message, i.e., no system prompt appeared on the
PUMA monitor.  I would like to know if anyone can help me, I would really
appreciate your reply.


Pei-Chieh Chin
Mechanical Engineering
The Ohio State University

Technical Details

Message-ID: <5664@quanta.eng.ohio-state.edu>

Path:

arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!mailrus!wuarchive!zaphod.mps.ohio-state.edu!quanta.eng.ohio-state.edu!rcgl1.eng.ohio-state.edu!CHIN

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!mailrus!wuarchive!zaphod.mps.ohio-state.edu!quanta.eng.ohio-state.edu!rcgl1.eng.ohio-state.edu!CHIN
From: CHIN@rcgl1.eng.ohio-state.edu (Pei-chieh Chin)
Newsgroups: comp.robotics
Subject: PUMA 560 AND IBM PC/XT
Message-ID: <5664@quanta.eng.ohio-state.edu>
Date: 29 Aug 90 15:12:12 GMT
Sender: news@quanta.eng.ohio-state.edu
Organization: Ohio State University
Lines: 16
Nntp-Posting-Host: eng.ohio-state.edu