Request info-off line programming-6 axis welding robot

Article View: comp.robotics

Article #825

#825

From: John Quin
Date: Mon, 26 Nov 1990 03:50

15 lines
1162 bytes

Does there exist in the world a software package/program which would enable 
OFF-LINE programming of a six axis welding robot.

The robot in question is a YASKAWA MOTOMAN K10S, currently operated via a
YASNAC ERC controller using a newly developed high level language called
"INFORM" for ON-LINE programming. A normal welding operation would require
movement of all six axes.

I want to be able to graphically simulate the robot commands on computer screen
and then save these commands to a program that can then be loaded to run the
robot.

OK if such software requires integration with other CAD/KINEMATICS packages.

Any RELEVANT info appreciated. JOHN QUINN.

Technical Details

Message-ID: <141@aegir.adl.dmt.csiro.au>

Path:

arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!samsung!munnari.oz.au!sirius.ucs.adelaide.edu.au!aegir!jaq

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!samsung!munnari.oz.au!sirius.ucs.adelaide.edu.au!aegir!jaq
From: jaq@adl.dmt.csiro.au (John Quin)
Newsgroups: comp.robotics
Subject: Request info-off line programming-6 axis welding robot
Message-ID: <141@aegir.adl.dmt.csiro.au>
Date: 26 Nov 90 03:50:12 GMT
Reply-To: jaq@aegir.UUCP (John Quin)
Distribution: comp.robotics
Organization: CSIRO Division of Manufacturing Technology, Adelaide, Australia
Lines: 15