🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Article View: comp.robotics
Article #984

Re: Gyros, Accelerometers, & Inclinometers

#984
From: Gregory D. Glosser
Date: Thu, 15 Oct 1992 17:30
28 lines
1494 bytes
In article <cer9kqu00iVgM2j9Rs@andrew.cmu.edu> ck3i+@andrew.cmu.edu (Christopher Kristof) writes:
>
>	Does anyone know of ANY sources for reasonably priced quartz gyros,
>accelerometers, and/or inclinometers?  So far I've only found one
>supplier of quartz gyros, and they wanted $1000+ dollars for one! (I'd
>need three of them to sense yaw, roll, and pitch.)
>	I plan to use the components in an electrically powered flying robot,
>so they need to be quite light.  I'd like to get information on any
>suppliers of the previously mentioned items, even if their products are
>not so light or reasonably priced.

Lucas NovaSensor sells 1"x1"x0.5" accelerometers for about $200 a piece.
I've used them and they are good, relatively noise free, but fairly
fragile.  Their address and phone # is:

	Lucas NovaSensor
	1055 Mission Court
	Fremont, CA 94539
	(510) 490-9100

Hope this helps.


Greg Glosser
Center for Automation and Intelligent Systems Research
Case Western Reserve University
Cleveland, Ohio
gdg@r2d2.eeap.cwru.edu
Technical Details
Message-ID: <1bk9r6INNmu1@usenet.INS.CWRU.Edu>
Path: arc1-ca.pugleaf.net!sparky!uunet!think.com!ames!agate!usenet.ins.cwru.edu!gdg
References: <cer9kqu00iVgM2j9Rs@andrew.cmu.edu>

Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!sparky!uunet!think.com!ames!agate!usenet.ins.cwru.edu!gdg
From: gdg@r2d2.eeap.cwru.edu (Gregory D. Glosser)
Newsgroups: comp.robotics
Subject: Re: Gyros, Accelerometers, & Inclinometers
Date: 15 Oct 1992 17:30:14 GMT
Organization: Case Western Reserve Univ. Cleveland, Ohio (USA)
Lines: 28
Message-ID: <1bk9r6INNmu1@usenet.INS.CWRU.Edu>
References: <cer9kqu00iVgM2j9Rs@andrew.cmu.edu>
NNTP-Posting-Host: lor.eeap.cwru.edu