Looking for users of the PUMA 562 industrial manipulator

Thread View: comp.robotics

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by Edward Cheung Fri, 08 Jan 1993 13:16

#1737

Author: Edward Cheung
Date: Fri, 08 Jan 1993 13:16

25 lines
1827 bytes

I am posting this for a colleague of mine who has no Usenet access.

He has borrowed a PUMA 562 with a Val II controller for use in his
lab for the purposes of grinding and polishing lenses, and is looking
for other users.

In particular he would like to know if anyone has interfaced a host
computer such as a MicroVax or IBM compatible to the Val controller.
Please bear in mind that his field of expertise is optics, and is
looking for a solution that requires little or no additional hardware.

If you have some information, please write to him at :
EUGENE@C717.GSFC.NASA.GOV

YOurs, Ed

+---------------------------------------+-----------------------------------+
|          Edward Cheung, Ph.D.         |  The opinions expressed herein    |
|Satellite Servicing Robotics Laboratory|    do not necessarily reflect     |
|    NASA Goddard Space Flight Center   |       those of my employers'      |
|         Code 714.1, Bldg T11B         |                                   |
|          Greenbelt, MD 20771          |                                   |
|   301-286-1269(office) 286-4653(fax)  |  My next book:                    |
| Internet: cheung@asylum.gsfc.nasa.gov | Statistics, Demos and Other Lies  |
+---------------------------------------+-----------------------------------+

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads