Thread View: comp.simulation
1 messages
1 total messages
Started by Moderator: Paul Fishwick
Wed, 10 May 1989 19:24
SIMULATION DIGEST V8 N9
Author: Moderator: Paul Fishwick
Date: Wed, 10 May 1989 19:24
Date: Wed, 10 May 1989 19:24
337 lines
12583 bytes
12583 bytes
Volume: 8, Issue: 9, Wed May 10 15:24:08 EDT 1989
+----------------+
| TODAY'S TOPICS |
+----------------+
(1) Parallel Simulation
(2) Simulation of Information Systems
(3) AI and Simulation Workshop
(4) Call for Papers: Object-Oriented Simulation
(5) Computer Simulation of Organic & Biomolec. Systems
(6) Needed: Code to Simulate LAN's
* Moderator: Paul Fishwick, Univ. of Florida
* Send topical mail to: simulation@uflorida.cis.ufl.edu
* Archives available via FTP to bikini.cis.ufl.edu, login as
'anonymous', use your last name as the password, change
directory to pub/simdigest.
* Simulation Tools available by doing above and changing the
directory to pub/simdigest/tools.
-----------------------------------------------------------------------------
Date: Mon, 1 May 89 18:48:52 CDT
From: hughes@ns.network.com (Jim Hughes x1676)
To: simulation@bikini.cis.ufl.edu
Subject: Re: SIMULATION DIGEST V8 N8
Newsgroups: comp.simulation
In-Reply-To: <20190@uflorida.cis.ufl.EDU>
Organization: Network Systems Corporation
Cc:
Regarding parallel simulation.
This a general comment which may be interesting to some of the
readers.
My experience has shown that single point simulations are not very
interesting, that is: Analysis of any model requires a complete
simulation set be created where one (or more) parameters are varied,
and the interactions of these parameters studied.
In addition, when significant changes to the model is made, another
complete set should be created to ensure no "anomalies" are created.
So, what does this have to do with parallel simulations?
A simulations set can be created in parallel on any number of
processors as long as each processor is working on a different data
point. (and, obviously the number of points is >= the number of
processors).
I do this using a loosely coupled (via Ethernet) set of workstations.
By using standard Unix and Unix utilities, I can start any number of
processors creating data points. Each processor returns the results to
a central fileserver, and then interrogates the server to determine
which point should be made next.
This scheme is effective for any simulation except one which is to big
(or slow) for a single processor to do on its own.
I would expect that this could be used when a site has a large number
of workstations (i.e. Sun), or when they have a single large
multiheaded mainframe (i.e. Cray YMP).
Jim Hughes,
hughes@network.com
or ...!{rutgers!dayton | amdahl!ems | uunet!rosevax}!umn-cs!ns!hughes
------------------------------
Organisation: University of Technology, Delft The Netherlands.
To: comp-simulation@hp4nl
Path: dutrun!winfave
From: dutrun!winfave@uunet.UU.NET (Alexander Verbraeck)
Newsgroups: comp.simulation
Subject: Information exchange on dynamic modelling and simulation
Keywords: Simulation, modelling, information systems
Date: 2 May 89 16:57:56 GMT
Organization: Delft University of Technology, The Netherlands
----------------------------------------------------------------
Subject: Research using modelling and simulation environments
From: Folkert Wierda & Alexander Verbraeck
Delft University of Technology
Department of Information Systems
P.O. Box 356, 2600 AJ Delft, The Netherlands
E-mail: winfave@hdetud1.bitnet or winfave@dutrun.UUCP
----------------------------------------------------------------
This is a request for mutual information exchange on the subject
of DYNAMIC MODELLING AND SIMULATION IN IS RESEARCH.
At our Department 10 PhD students are working on dynamic modelling
of information systems, and on the development of tools, methods
and techniques to support dynamic modelling. We use simulation as
an aid for conceptualizing, modelling and evaluating information
systems and their impact on the organizational systems they intend
to influence.
We would like to get in touch with researchers who are working in
the same area, for exchanging information, publications and
software in this field.
Please let us know if:
1. You are working in the field of dynamic modelling and
simulation of information systems, and are interested in
exchanging information on the subject;
2. You know of researchers at your Institute who are working in
the field of dynamic modelling and simulation of information
systems, and might be interested in exchanging information on
the subject;
3. You, or your research group, have developed software for
discrete event simulation, dynamic modelling or animation,
that can be made available for our research.
Please reply by e-mail. We will make a compilation of the replies
and post them in comp.simulation.
Yours sincerely,
Folkert Wierda WINFFWW @ HDETUD1 . BITNET
Alexander Verbraeck WINFAVE @ HDETUD1 . BITNET
------------------------------
Date: Thu, 4 May 89 16:14 MST
From: ROZENBLIT%ECEVAX@rvax.ccit.arizona.edu
Please Post
Call for Participation
Fourth AI & Simulation Workshop
11th International Joint Conference on Artificial Intelligence
Detroit, Michigan, Monday August 21, 1989
The workshop will bring together researchers and
practitioners who are interested in exploring the benefits of
merging methods and techniques offered by Artificial Intelligence
and Simulation Modelling. Research and practical results that
mutually enhance the domains will be discussed.
This meeting will be the fourth in a series of Artificial
Intelligence and Simulation Workshops that have been held
annually at the AAAI conferences since 1986. Whereas the previous
workshops spanned a wide range of topics including general
paradigms, methodologies, and a number of application problems
(mainly utilization of AI techniques in simulation modelling),
this time the scope of discussion will be focused on the
following three major areas: 1.) reasoning about physical
systems: simulation-based approaches and qualitative methods; 2.)
interfaces of simulation with planning and scheduling; 3.)
applications.
Ample time will be left for debate in the afternoon session
with round table group discussions covering each of the topics.
Abstracts describing your research should be sent to:
Dr. Jerzy W. Rozenblit,
Dept. of Electrical and Computer Engineering
University of Arizona, Tucson, AZ 85721,
tel. (602) 621-6177,
e-mail: rozenblit@arizevax.bitnet
Please send six copies of your abstract. Include name,
address, phone number, and e-mail address. Abstracts must be
received by May 15, 1989. Please do not exceed a limit of 800
words. Abstracts should include key figures and references.
Each abstract will be refereed by panel members. Authors
will be notified about acceptance or rejection by June 15, 1989.
The accepted abstracts will be placed in the workshop proceeding
to be distributed at the meeting. The workshop will feature 9
presentations selected by the panel members and round table
discussions.
Workshop Chairman: Dr. Jerzy W. Rozenblit, University of Arizona
Panel Members:
Dr. Paul A. Fishwick, University of Florida;
Dr. Richard B. Modjeski, U.S. Army Concepts Analysis Agency;
Dr. Norman R. Nielsen, Stanford Research Institute;
Dr. Tuncer I. Oren, University of Ottawa;
Dr. Bernard P. Zeigler, University of Arizona
------------------------------
Date: Sun, 07 May 89 22:53:54 PDT
From: GUASCH%CALSTATE.BITNET@CUNYVM.CUNY.EDU (Prof. Dr. Antonio Guasch)
To: fishwick@ufl.edu
Cc: Gregor_Bailar@next.com
Cc: bbourne@bnr.bitnet
Cc: Ray_Schaaf@next.com
Cc: stp@ParcPlace.com
Cc: eger@servax.bitnet
Subject: Call for papers (OO Simulation)
CALL FOR PAPERS
------------------
1990 SCS Western Multiconference
January 17-19
Town and Country Hotel
San Diego, California
This is a call for the OBJECT-ORIENTED SIMULATION session
Object-oriented design and programming are becoming
increasingly important in software engineering in
general, and in simulation in particular. Some
specific areas of interest are:
- Object-oriented simulation specification.
- Object-oriented software for simulation.
- Linking simulation to object-oriented data
bases
- Object-oriented methodologies in continuous,
discrete and combined simulation.
Program Chairman
Antonio Guasch
California State Univ., Chico
Dealines and requirements:
1- Abstracts should be sent to A. Guasch by June 15.
2- Only original, unpublished papers will be accepted.
3- Notification of acceptance or rejection will be sent
August 1, 1989. An Author's Kit and related information
will be sent upon acceptance of the paper. Authors will
be expected to register early and to attend the
conference at their own expenses. Your paper will not
be published in the Proceedings if you cannot present
it at the conference.
4- Camera-ready copies must be sent to the SCS International
by October 8, 1989.
Submit paper proposals to:
A. Guasch
Department of Computer Science
California State University, Chico
Chico, CA 95929-0410
or to (e-mail):
guasch@calstate.bitnet
------------------------------
Date: Mon, 08 May 89 12:01:30 EDT
From: David Salzman <SALZMAN@pucc.princeton.edu>
Subject: JvNC lecture: Comp. Simulation of Organic & Biomolec. Systems
To: comp-simulation@rutgers.edu
The John von Neumann National Supercomputer Center
665 College Road East
Princeton Forrestal Center, Plainsboro NJ
"Computer Simulations of Organic and Biomolecular Systems"
William Jorgensen
Purdue University
4:00pm, Tuesday, May 9
This talk is co-sponsored by the Visiting Supercomputer Scientist
Program at Rutgers University.
William Jorgensen is professor of chemistry at Purdue University,
where he has taught since earning his doctorate in chemistry from
Harvard. He studies computational methods in molecular quantum
mechanics.
Open to the public. Refreshments will be served at 3:40 PM.
For information about the seminar or directions to the Center,
contact <SCIENCE@JVNCD.BITNET> or call 609/520-2000.
Reservations are not needed.
------------------------------
Return-Path: <rzahavi@gateway.mitre.org>
Date: Tue, 9 May 89 11:00:42 EDT
From: rzahavi@gateway.mitre.org (Ron Zahavi)
To: simulation@ufl.edu
Subject: LAN simulation packages
Someone here at Mitre needs to do some LAN simulations. They have found
the MIT simulator, NEST and OPNET too general. They would like to
minimize coding (or eliminate it). Does anyone know of any packages
which can simulate LANs specifically?
Thanks,
-- Ron --
==============================================================================
Ron Zahavi (703) 883-5637 Mitre Corporation
rzahavi@gateway.mitre.org 7525 Colshire Drive
McLean, VA 22102
==============================================================================
------------------------------
+--------------------------+
| END OF SIMULATION DIGEST |
+--------------------------+
Thread Navigation
This is a paginated view of messages in the thread with full content displayed inline.
Messages are displayed in chronological order, with the original post highlighted in green.
Use pagination controls to navigate through all messages in large threads.
Back to All Threads