🚀 go-pugleaf

Hello out there!

I'm currently writing my Master's Thesis using MATLAB 3.5 and FrameMaker and
had the same problem as everyone else. MATLAB can write graphs in EPS format
which can be imported into FrameMaker, but to be able to view them, the graphs
must be in EPSI format (almost the same format as EPS, but with a bitmap
approximation to the picture).

My problem was solved by finding the following little filter program in
comp.something.postscript. It uses Ghostscript to make the bitmap necessary
in the EPSI format.

So, try this out:

1.	Check so you have 'gs' (Ghostscript) by typing 'which gs' in UNIX.
	An output of something like '/usr/pd/gnu/bin/gs' means you're in
	business.

2.	Cut out the script in this posting at the **** CUT HERE **** markings.

3.	Type 'which perl' to see where you have your perl program (yes, you'll
	need this one too).

4.	Edit the first line of the script to match your perl file path.

5.	Call the script 'eps2epsi' or whatever you like.

If you use MATLAB 4.0 you can just save a picture in EPS format and then use this
filter. In MATLAB 3.5 you save the picture in META format and use 'gpp -deps'
before using the EPS2EPSI filter.

Good Luck!
Niclas Mattsson




*********************** CUT HERE *************************
#!/usr/pd/gnu/bin/perl
'di';
'ig00';

# EPSI file generator. Written by Gisle Aas, NR, 1991
# Converts all types of EPS-files to the EPSI format where a bitmap preview
# is included. You need GhostScript to render the bitmaps for you.

# $Log: eps2epsi,v $
# Revision 1.1  1991/05/28  09:18:04  aas
# Initial revision
#

$prog_name = substr($0,rindex($0,"/")+1);
require 'getopts.pl';
unless (&Getopts('w:')) {
  print STDOUT "Usage: $prog_name [-w <preview width>] [<file>]\n";
  exit 1;
}

die 'To many files' if ($#ARGV > 0);

@epsfile = <>;                  # slurp
die 'Not PostScript file' unless ($epsfile[0] =~ /^%!/);

# Get the dimensions of the picture
for (@epsfile) {
   ($llx, $lly, $urx, $ury) =
       /^%%BoundingBox:\s*(-?\d+)\s+(-?\d+)\s+(-?\d+)\s+(-?\d+)/;
   last if defined($llx);
}
die 'No %%BoundingBox found in file' unless defined($llx);

# Calculate 
$preview_width = int(($opt_w || 79) / 2) * 8;
$width  = $urx - $llx + 1;
$height = $ury - $lly + 1;
$scalefactor = $preview_width / $width;
$width  = int($width * $scalefactor);
$height = int($height * $scalefactor);

# Produce GhostScript program
$gsfile = "/tmp/gs$$.tmp";
open(GSFILE, ">$gsfile") || die "Can't write to file $gsfile";
print GSFILE <<"---EndGhostScriptProgram---";
%!GhostScript
/BITIMAGE_WIDTH $width def
/BITIMAGE_HEIGHT $height def
/BITIMAGE_FILE (%stdout) def

%---- Setup a memory device --------
[1 0 0 -1 0 BITIMAGE_HEIGHT]
BITIMAGE_WIDTH BITIMAGE_HEIGHT
%
% [1 1 1 rgbcolor 0 0 0 rgbcolor] <-- 2.3 arguments
% <ff 00>                         <-- 2.4 arguments from ghost@aladdin.com
%
<ff 00> 
makeimagedevice
setdevice

%--- Some transformations
/showpage {} def
$scalefactor dup scale
$llx neg $lly neg translate

%--- The old EPS file
@epsfile

%---- Print bitmap on a file -------
/line BITIMAGE_WIDTH 8 idiv 1 add string def
/output BITIMAGE_FILE (w) file def
output (---------) writestring
output 10 write
0  1  BITIMAGE_HEIGHT 1 sub { %for
   output (%) writestring
   currentdevice exch
   line copyscanlines
   output exch writehexstring
   output 10 write
} for
output flushfile
quit
---EndGhostScriptProgram---

close GSFILE;
close STDIN;    # so that GhostScript can't read it.

@gsoutput = `gs -q -DNODISPLAY $gsfile`;   # run GhostScript
die "Can't run GhostScript" unless $? == 0;
unlink $gsfile;

@preview = grep(/^-----/ .. 1, @gsoutput);   # remove GhostScript garbage
shift(preview);
if ($#preview < 0) {
  print STDERR "GhostScript gives no output for the specified file\n";
  print STDERR @gsoutput;
  exit 1;
}

print shift(epsfile);
$_ = shift(epsfile);
while (/^%%/) {
  if (/^%%BoundingBox:/) {
    print "%%BoundingBox: $llx $lly $urx $ury\n" if !defined($boundingbox);
    $boundingbox = 1;
  } elsif (/^%%EndComments/) {
    last;
  } else {
    print;
  }
  $_ = shift(epsfile);
}
print "%%BoundingBox: $llx $lly $urx $ury\n" if !defined($boundingbox);
print "%%EndComments
%%BeginPreview: $width $height 1 $height\n";
print @preview;
print "%%EndPreview\n";

print grep(!(/^%%BeginPreview:/ .. /^%%EndPreview/) && !/^%%BoundingBox:/,
           @epsfile);





###########################################################################
        # These next few lines are legal in both Perl and nroff.

.00;                    # finish .ig
 
'di                     \" finish diversion--previous line must be blank
.nr nl 0-1              \" fake up transition to first page again
.nr % 0                 \" start at page 1
';<<'.ex'; #__END__ #### From here on it's a standard manual page #########
.TH EPS2EPSI 1 "May 1991"
.SH NAME
eps2epsi \- Filter for inclusion of a preview in an EPS file
.SH SYNOPSIS
.B eps2epsi
[
.B \-w
.I preview_width
] [
.I filename
]
.SH DESCRIPTION
.B Eps2epsi
puts a preview section in a PostScript file (preferably EPSF).
The preview produced
is in the encapsulated PostScript interchange format (EPSI)
suitable for import by FrameMaker and other document composing
systems.
.B Eps2epsi
reads the file specified (or standard input) and sends the new file
with the preview included to standard output.
.PP
.B Esp2epsi
uses
.B GhostScript
to render the preview bitmap, which means that
.B GhostScript
must be installed at your system before you can use
.B eps2epsi.
.SH OPTIONS
.TP 5
.BI \-w " n"
Set the width (in characters) of the preview section. This also specifies the
resolution of the preview as
.I n
times 4 horizontally.
.SH SEE ALSO
.BR perl (1),
.BR gs(1)
.SH AUTHOR
Gisle Aas, Norwegian Computing Center (NR), Oslo, Norway.
<Gisle.Aas@nr.no>
.ex

*************************** CUT HERE ****************************