Re: Z80 -> 8080 converter

Article View: comp.sources.d

Article #2084

#2084

From: Derek Terveer
Date: Tue, 13 Jan 1987 00:36

9 lines
1114 bytes

In article <249@rocksanne.UUCP>, stein@rocksanne.UUCP (Adam Stein) writes:
> I am look for a Z80 to 8080 program converter.  My C compiler only comes with
> an 8080 assembler.  This is for a TRS-80 Model 4.  I don't care what language
> it's written in.  I would appreciate any help on this.

I believe that z80 has a mere two instructions that 8080 doesn't have.
Therefore, most likely, your z80 program will run unchanged with the 8080
assembler (I hope i'm right in this).  (As long as the z80 code doesn't use
those two instructions that is)

Technical Details

Message-ID: <175@herman.UUCP>

Path: arc1-ca.pugleaf.net!utzoo!mnetor!seismo!rutgers!dayton!meccts!meccsd!mecc!herman!det

References: <249@rocksanne.UUCP>

Show Full Headers

Complete Article Headers

Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: arc1-ca.pugleaf.net!utzoo!mnetor!seismo!rutgers!dayton!meccts!meccsd!mecc!herman!det
From: det@herman.UUCP (Derek Terveer)
Newsgroups: comp.sources.d
Subject: Re: Z80 -> 8080 converter
Message-ID: <175@herman.UUCP>
Date: Mon, 12-Jan-87 19:36:08 EST
Article-I.D.: herman.175
Posted: Mon Jan 12 19:36:08 1987
Date-Received: Wed, 14-Jan-87 03:25:31 EST
References: <249@rocksanne.UUCP>
Organization: Unisys Inc.-CSD  Eagan,MN
Lines: 9
Keywords: Z80 8080 converter
Summary: z80 and 8080 virtually the same

Reply to Parent Message