Re: Z80 -> 8080 converter

Article View: comp.sources.d

Article #2095

#2095

From: Kenneth Ng
Date: Thu, 15 Jan 1987 11:04

22 lines
1528 bytes

In article <175@herman.UUCP>, det@herman.UUCP (Derek Terveer) writes:
> In article <249@rocksanne.UUCP>, stein@rocksanne.UUCP (Adam Stein) writes:
> > I am look for a Z80 to 8080 program converter.  My C compiler only comes with
> > an 8080 assembler.  This is for a TRS-80 Model 4.  I don't care what language
> > it's written in.  I would appreciate any help on this.
> 
> I believe that z80 has a mere two instructions that 8080 doesn't have.
> Therefore, most likely, your z80 program will run unchanged with the 8080
> assembler (I hope i'm right in this).  (As long as the z80 code doesn't use
> those two instructions that is)

The z80 has a LOT more than 2 more op codes over the 8080.


-- 
Kenneth Ng: Post office: NJIT - CCCC, Newark New Jersey  07102
uucp !ihnp4!allegra!bellcore!argus!ken
     ***   WARNING:  NOT ken@bellcore.uucp ***
bitnet(prefered) ken@orion.bitnet

Gillian: "Are you sure you won't change your mind?"
Spock: "Is there something wrong with the one I have?"

Technical Details

Message-ID: <707@argus.UUCP>

Path: arc1-ca.pugleaf.net!utzoo!mnetor!seismo!rutgers!andromeda!argus!ken

References: <249@rocksanne.UUCP> <175@herman.UUCP>

Show Full Headers

Complete Article Headers

Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: arc1-ca.pugleaf.net!utzoo!mnetor!seismo!rutgers!andromeda!argus!ken
From: ken@argus.UUCP (Kenneth Ng)
Newsgroups: comp.sources.d
Subject: Re: Z80 -> 8080 converter
Message-ID: <707@argus.UUCP>
Date: Thu, 15-Jan-87 06:04:09 EST
Article-I.D.: argus.707
Posted: Thu Jan 15 06:04:09 1987
Date-Received: Thu, 15-Jan-87 22:34:05 EST
References: <249@rocksanne.UUCP> <175@herman.UUCP>
Organization: NJ Inst of Tech., Newark NJ
Lines: 22
Keywords: Z80 8080 converter

Reply to Parent Message