🚀 go-pugleaf

[StuffIt Utility for UN*X]

After seeing several requests for a version of Stuffit for UN*X I thought
I'd post the following:

---
#! /bin/sh
# This is a shell archive, meaning:
# 1. Remove everything above the #! /bin/sh line.
# 2. Save the resulting text in a file.
# 3. Execute the file with /bin/sh (not csh) to create the files:
#	README
#	Makefile
#	sit.h
#	sit.c
#	updcrc.c
#	macbinfilt.c
# This archive created: Tue Dec  6 07:45:06 1988
# By:	Roger L. Long (bytebug@dhw68k.cts.com)
#
export PATH; PATH=/bin:$PATH
echo shar: extracting "'README'" '(1209 characters)'
if test -f 'README'
then
	echo shar: will not over-write existing file "'README'"
else
sed 's/^X//' << \SHAR_EOF > 'README'
XThis shar file contains the source to "sit" a UNIX utility which produces
XStuffit archives for downloading to the mac.  As a bonus I've also included
X"macbinfilt", a filter which takes articles from comp.binaries.mac, puts the
Xparts in the correct order, and throws out all the "noise" lines.
X
XTo use the sit code you need the getopt(3) library routine and the compress(1)
Xutility, both of which most everyone seems to have by now.
X
XThere is not much original code here: everything is reverse engineered from
Xthe unsit utility by Alan Weber.  The updcrc.c file is exactly the same file
Xfrom the unsit package.
X
XI've tested the code on both BSD and SYSV machines. Both machines were big
Xendian so byte order problems may still be lurking.
X
XWhen you transfer archives to your mac be sure to use "binary" mode.  In 
Xorder for Suffit to recognize your downloaded file it must have a type of
X"SIT!".  If your communication program doesn't allow you to specify the type
Xyou'll need to ResEdit it in.  It should be quite simple to modify sit.c
Xto put a MacBinary header on the archive.
X
XAs with everything in the modern world: use at your own risk.
X
X--Tom Bereiter
X  ..!{rutgers,ames}!cs.utexas.edu!halley!rolex!twb
SHAR_EOF
if test 1209 -ne "`wc -c < 'README'`"
then
	echo shar: error transmitting "'README'" '(should have been 1209 characters)'
fi
fi # end of overwriting check
echo shar: extracting "'Makefile'" '(67 characters)'
if test -f 'Makefile'
then
	echo shar: will not over-write existing file "'Makefile'"
else
sed 's/^X//' << \SHAR_EOF > 'Makefile'
Xall:	sit macbinfilt
X
Xsit:	sit.o updcrc.o
X	cc -o sit sit.o updcrc.o
SHAR_EOF
if test 67 -ne "`wc -c < 'Makefile'`"
then
	echo shar: error transmitting "'Makefile'" '(should have been 67 characters)'
fi
fi # end of overwriting check
echo shar: extracting "'sit.h'" '(1834 characters)'
if test -f 'sit.h'
then
	echo shar: will not over-write existing file "'sit.h'"
else
sed 's/^X//' << \SHAR_EOF > 'sit.h'
X
X/* sit.h: contains declarations for SIT headers */
X
Xtypedef struct sitHdr {		/* 22 bytes */
X	u_char	sig1[4];		/* = 'SIT!' -- for verification */
X	u_char	numFiles[2];	/* number of files in archive */
X	u_char	arcLen[4];		/* length of entire archive incl. */
X	u_char	sig2[4];		/* = 'rLau' -- for verification */
X	u_char	version;		/* version number */
X	char reserved[7];
X};
X
Xtypedef struct fileHdr {	/* 112 bytes */
X	u_char	compRMethod;		/* rsrc fork compression method */
X	u_char	compDMethod;		/* data fork compression method */
X	u_char	fName[64];			/* a STR63 */
X	char	fType[4];			/* file type */
X	char	fCreator[4];		/* creator... */
X	char	FndrFlags[2];		/* copy of Finder flags */
X	char	cDate[4];			/* creation date */
X	char	mDate[4];			/* !restored-compat w/backup prgms */
X	u_char	rLen[4];			/* decom rsrc length */
X	u_char	dLen[4];			/* decomp data length */
X	u_char	cRLen[4];			/* compressed lengths */
X	u_char	cDLen[4];
X	u_char	rsrcCRC[2];			/* crc of rsrc fork */
X	u_char	dataCRC[2];			/* crc of data fork */
X	char	reserved[6];
X	u_char	hdrCRC[2];			/* crc of file header */
X};
X
X/* file format is:
X	sitArchiveHdr
X		file1Hdr
X			file1RsrcFork
X			file1DataFork
X		file2Hdr
X			file2RsrcFork
X			file2DataFork
X		.
X		.
X		.
X		fileNHdr
X			fileNRsrcFork
X			fileNDataFork
X*/
X
X
X
X/* compression methods */
X#define noComp	0	/* just read each byte and write it to archive */
X#define repComp 1	/* RLE compression */
X#define lpzComp 2	/* LZW compression */
X#define hufComp 3	/* Huffman compression */
X
X/* all other numbers are reserved */
X
X/*
X * the format of a *.info file made by xbin
X */
Xstruct infohdr {
X	char	res0;
X	char	name[64];	/*  2 (a str 63) */
X	char	type[4];	/* 65 */
X	char	creator[4];	/* 69 */
X	char	flag[2];	/* 73 */
X	char	res1[8];
X	char	dlen[4];	/* 83 */
X	char	rlen[4];	/* 87 */
X	char	ctime[4];	/* 91 */
X	char	mtime[4];	/* 95 */
X};
SHAR_EOF
if test 1834 -ne "`wc -c < 'sit.h'`"
then
	echo shar: error transmitting "'sit.h'" '(should have been 1834 characters)'
fi
fi # end of overwriting check
echo shar: extracting "'sit.c'" '(6063 characters)'
if test -f 'sit.c'
then
	echo shar: will not over-write existing file "'sit.c'"
else
sed 's/^X//' << \SHAR_EOF > 'sit.c'
X/*
X * sit - Stuffit for UNIX
X *  Puts unix data files into stuffit archive suitable for downloading
X *	to a Mac.  Automatically processes files output from xbin.
X *
X *  Reverse engineered from unsit by Allan G. Weber, which was based on
X *  macput, which was based on ...
X *  Just like unsit this uses the host's version of compress to do the work.
X *
X * Examples:
X *   1) take collection of UNIX text files and make them LSC text files 
X *	when uncompressed on the mac:
X *	   sit -u -T TEXT -C KAHL file ...
X *   2) Process output from xbin:
X *	   xbin file1	 (produces FileOne.{info,rsrc,data})
X *	   sit file1
X *
X *  Tom Bereiter
X *	..!{rutgers,ames}!cs.utexas.edu!halley!rolex!twb
X */
X#define BSD
X
X#include <sys/types.h>
X#include <sys/stat.h>
X#include <stdio.h>
X#include "sit.h"
X#ifdef BSD
X#include <sys/time.h>
X#include <sys/timeb.h>
X#else
X#include <time.h>
Xextern long timezone;
X#endif
X
X#ifndef min
X#define min(a,b) ((a)<(b)?(a):(b))
X#endif
X
X/* Mac time of 00:00:00 GMT, Jan 1, 1970 */
X#define TIMEDIFF 0x7c25b080
X
Xstruct sitHdr sh;
Xstruct fileHdr fh;
X
Xchar buf[BUFSIZ];
Xchar *defoutfile = "archive.sit";
Xint ofd;
Xushort crc;
Xint clen;
Xint rmfiles;
Xint	unixf;
Xchar *Creator, *Type;
X
Xusage() { fprintf(stderr,"Usage: sit file\n"); }
Xextern char *optarg;
Xextern int optind;
X
Xmain(argc,argv) char **argv; {
X	int i,n;
X	int total, nfiles;
X	int c;
X
X    while ((c=getopt(argc, argv, "ro:uC:T:")) != EOF)
X	switch (c) {
X		case 'r':
X			rmfiles++;	/* remove files when done */
X			break;
X		case 'o':		/* specify output file */
X			defoutfile = optarg;
X			break;
X		case 'u':		/* unix file -- change '\n' to '\r' */
X			unixf++;
X			break;
X		case 'C':		/* set Mac creator */
X			Creator = optarg;
X			break;
X		case 'T':		/* set Mac file type */
X			Type = optarg;
X			break;
X		case '?':
X			usage();
X			exit(1);
X	}
X
X	if ((ofd=creat(defoutfile,0644))<0) {
X		perror(defoutfile);
X		exit(1);
X	}
X	/* empty header, will seek back and fill in later */
X	write(ofd,&sh,sizeof sh);
X
X	for (i=optind; i<argc; i++) {
X		n = put_file(argv[i]);
X		if (n) {
X			total += n;
X			nfiles++;
X		}
X	}
X	lseek(ofd,0,0);
X
X	total += sizeof(sh);
X	/* header header */
X    strncpy(sh.sig1,"SIT!",4);
X    cp2(nfiles,sh.numFiles);
X    cp4(total,sh.arcLen);
X    strncpy(sh.sig2,"rLau",4);
X    sh.version = 1;
X
X	write(ofd,&sh,sizeof sh);
X}
X
Xput_file(name)
Xchar name[];
X{
X	struct stat st;
X	struct infohdr ih;
X	int i,n,fd;
X	long fpos1, fpos2;
X	char nbuf[256], *p;
X	int fork=0;
X	long tdiff;
X	struct tm *tp;
X#ifdef BSD
X	struct timeb tbuf;
X#else
X	long bs;
X#endif
X
X	fpos1 = lseek(ofd,0,1); /* remember where we are */
X	/* write empty header, will seek back and fill in later */
X	bzero(&fh,sizeof fh);
X	write(ofd,&fh,sizeof fh);
X
X	/* look for resource fork */
X	strcpy(nbuf,name);
X	strcat(nbuf,".rsrc");
X	if (stat(nbuf,&st)>=0 && st.st_size) {	/* resource fork exists */
X		dofork(nbuf);
X		cp4(st.st_size,fh.rLen);
X		cp4(clen,fh.cRLen);
X		cp2(crc,fh.rsrcCRC);
X		fh.compRMethod = lpzComp;
X		fork++;
X	}
X	if (rmfiles) unlink(nbuf);	/* ignore errors */
X
X	/* look for data fork */
X	st.st_size = 0;
X	strcpy(nbuf,name);
X	if (stat(nbuf,&st)<0) {		/* first try plain name */
X		strcat(nbuf,".data");
X		stat(nbuf,&st);
X	}
X	if (st.st_size) {		/* data fork exists */
X		dofork(nbuf);
X		cp4(st.st_size,fh.dLen);
X		cp4(clen,fh.cDLen);
X		cp2(crc,fh.dataCRC);
X		fh.compDMethod = lpzComp;
X		fork++;
X	}
X	if (fork == 0) {
X		fprintf(stderr,"%s: no data or resource files\n",name);
X		return 0;
X	}
X	if (rmfiles) unlink(nbuf);	/* ignore errors */
X
X	/* look for .info file */
X	strcpy(nbuf,name);
X	strcat(nbuf,".info");
X	if ((fd=open(nbuf,0))>=0 && read(fd,&ih,sizeof(ih))==sizeof(ih)) {
X		strncpy(fh.fName, ih.name,64);
X		strncpy(fh.fType, ih.type, 4);
X		strncpy(fh.fCreator, ih.creator, 4);
X		strncpy(fh.FndrFlags, ih.flag, 2);
X		strncpy(fh.cDate, ih.ctime, 4);
X		strncpy(fh.mDate, ih.mtime, 4);
X	}
X	else {	/* no info file so fake it */
X		strncpy(&fh.fName[1], name,63); fh.fName[0] = min(strlen(name),63);
X		/* default to LSC text file */
X		strncpy(fh.fType, Type ? Type : "TEXT", 4);
X		strncpy(fh.fCreator, Creator ? Creator : "KAHL", 4);
X		/* convert unix file time to mac time format */
X#ifdef BSD
X		ftime(&tbuf);
X		tp = localtime(&tbuf.time);
X		tdiff = TIMEDIFF - tbuf.timezone * 60;
X		if (tp->tm_isdst)
X			tdiff += 60 * 60;
X#else
X		/* I hope this is right! -andy */
X		time(&bs);
X		tp = localtime(&bs);
X		tdiff = TIMEDIFF - timezone;
X		if (tp->tm_isdst)
X			tdiff += 60 * 60;
X#endif
X		cp4(st.st_ctime + tdiff, fh.cDate);
X		cp4(st.st_mtime + tdiff, fh.mDate);
X	}
X	close(fd);
X	if (rmfiles) unlink(nbuf);	/* ignore errors */
X
X	crc = updcrc(0,&fh,(sizeof fh)-2);
X	cp2(crc, fh.hdrCRC);
X
X	fpos2 = lseek(ofd,0,1);		/* remember where we are */
X	lseek(ofd,fpos1,0);				/* seek back over file(s) and header */
X	write(ofd,&fh,sizeof fh);		/* write back header */
X	fpos2=lseek(ofd,fpos2,0);				/* seek forward file */
X
X	return (fpos2 - fpos1);
X}
X	
Xdofork(name)
Xchar name[];
X{
X	FILE *fs;
X	int n, fd, ufd;
X	char *p;
X
X	if ((fd=open(name,0))<0) {
X		perror(name);
X		return 0;
X	}   
X	if (unixf)		/* build conversion file */
X		if ((ufd=creat("sit+temp",0644))<0) {
X			perror("sit+temp");
X			return 0;
X		}   
X	/* do crc of file: */
X	crc = 0;
X	while ((n=read(fd,buf,BUFSIZ))>0) {
X		if (unixf) {	/* convert '\n' to '\r' */
X			for (p=buf; p<&buf[n]; p++)
X				if (*p == '\n') *p = '\r';
X			write(ufd,buf,n);
X		}
X		crc = updcrc(crc,buf,n);
X	}
X	close(fd);
X	/*
X	 * open pipe to compress file
X	 *   If a unix file ('\n' -> '\r' conversion) 'sit+temp' will be a new copy
X	 *   with the conversion done.	Otherwise, 'sit+temp' is just a link to 
X	 *   the input file.
X	 */
X	if (unixf)
X		close(ufd);
X	else link(name,"sit+temp");
X	fs = popen("compress -c -n -b 14 sit+temp","r");
X	if (fs == NULL) {
X		perror(name);
X		return 0;
X	}
X	/* write out compressed file */
X	clen = 0;
X	while ((n=fread(buf,1,BUFSIZ,fs))>0) {
X		write(ofd,buf,n);
X		clen += n;
X	}
X	pclose(fs);
X	unlink("sit+temp");
X}
X
Xcp2(x,dest)
Xunsigned short x;
Xchar dest[];
X{
X	dest[0] = x>>8;
X	dest[1] = x;
X}
X
Xcp4(x,dest)
Xunsigned long x;
Xchar dest[];
X{
X	dest[0] = x>>24;
X	dest[1] = x>>16;
X	dest[2] = x>>8;
X	dest[3] = x;
X}
SHAR_EOF
if test 6063 -ne "`wc -c < 'sit.c'`"
then
	echo shar: error transmitting "'sit.c'" '(should have been 6063 characters)'
fi
fi # end of overwriting check
echo shar: extracting "'updcrc.c'" '(5848 characters)'
if test -f 'updcrc.c'
then
	echo shar: will not over-write existing file "'updcrc.c'"
else
sed 's/^X//' << \SHAR_EOF > 'updcrc.c'
X/* updcrc(3), crc(1) - calculate crc polynomials
X *
X * Calculate, intelligently, the CRC of a dataset incrementally given a 
X * buffer full at a time.
X * 
X * Usage:
X * 	newcrc = updcrc( oldcrc, bufadr, buflen )
X * 		unsigned int oldcrc, buflen;
X * 		char *bufadr;
X *
X * Compiling with -DTEST creates a program to print the CRC of stdin to stdout.
X * Compile with -DMAKETAB to print values for crctab to stdout.  If you change
X *	the CRC polynomial parameters, be sure to do this and change
X *	crctab's initial value.
X *
X * Notes:
X *  Regards the data stream as an integer whose MSB is the MSB of the first
X *  byte recieved.  This number is 'divided' (using xor instead of subtraction)
X *  by the crc-polynomial P.
X *  XMODEM does things a little differently, essentially treating the LSB of
X * the first data byte as the MSB of the integer. Define SWAPPED to make
X * things behave in this manner.
X *
X * Author:	Mark G. Mendel, 7/86
X *		UUCP: ihnp4!umn-cs!hyper!mark, GEnie: mgm
X */
X
X/* The CRC polynomial.
X * These 4 values define the crc-polynomial.
X * If you change them, you must change crctab[]'s initial value to what is
X * printed by initcrctab() [see 'compile with -DMAKETAB' above].
X */
X    /* Value used by:	    		CITT	XMODEM	ARC  	*/
X#define	P	 0xA001	 /* the poly:	0x1021	0x1021	A001	*/
X#define INIT_CRC 0L	 /* init value:	-1	0	0	*/
X#define SWAPPED		 /* bit order:	undef	defined	defined */
X#define W	16	 /* bits in CRC:16	16	16	*/
X
X    /* data type that holds a W-bit unsigned integer */
X#if W <= 16
X#  define WTYPE	unsigned short
X#else
X#  define WTYPE   unsigned long
X#endif
X
X    /* the number of bits per char: don't change it. */
X#define B	8
X
Xstatic WTYPE crctab[1<<B] = /* as calculated by initcrctab() */ {
X0x0,  0xc0c1,  0xc181,  0x140,  0xc301,  0x3c0,  0x280,  0xc241,
X0xc601,  0x6c0,  0x780,  0xc741,  0x500,  0xc5c1,  0xc481,  0x440,
X0xcc01,  0xcc0,  0xd80,  0xcd41,  0xf00,  0xcfc1,  0xce81,  0xe40,
X0xa00,  0xcac1,  0xcb81,  0xb40,  0xc901,  0x9c0,  0x880,  0xc841,
X0xd801,  0x18c0,  0x1980,  0xd941,  0x1b00,  0xdbc1,  0xda81,  0x1a40,
X0x1e00,  0xdec1,  0xdf81,  0x1f40,  0xdd01,  0x1dc0,  0x1c80,  0xdc41,
X0x1400,  0xd4c1,  0xd581,  0x1540,  0xd701,  0x17c0,  0x1680,  0xd641,
X0xd201,  0x12c0,  0x1380,  0xd341,  0x1100,  0xd1c1,  0xd081,  0x1040,
X0xf001,  0x30c0,  0x3180,  0xf141,  0x3300,  0xf3c1,  0xf281,  0x3240,
X0x3600,  0xf6c1,  0xf781,  0x3740,  0xf501,  0x35c0,  0x3480,  0xf441,
X0x3c00,  0xfcc1,  0xfd81,  0x3d40,  0xff01,  0x3fc0,  0x3e80,  0xfe41,
X0xfa01,  0x3ac0,  0x3b80,  0xfb41,  0x3900,  0xf9c1,  0xf881,  0x3840,
X0x2800,  0xe8c1,  0xe981,  0x2940,  0xeb01,  0x2bc0,  0x2a80,  0xea41,
X0xee01,  0x2ec0,  0x2f80,  0xef41,  0x2d00,  0xedc1,  0xec81,  0x2c40,
X0xe401,  0x24c0,  0x2580,  0xe541,  0x2700,  0xe7c1,  0xe681,  0x2640,
X0x2200,  0xe2c1,  0xe381,  0x2340,  0xe101,  0x21c0,  0x2080,  0xe041,
X0xa001,  0x60c0,  0x6180,  0xa141,  0x6300,  0xa3c1,  0xa281,  0x6240,
X0x6600,  0xa6c1,  0xa781,  0x6740,  0xa501,  0x65c0,  0x6480,  0xa441,
X0x6c00,  0xacc1,  0xad81,  0x6d40,  0xaf01,  0x6fc0,  0x6e80,  0xae41,
X0xaa01,  0x6ac0,  0x6b80,  0xab41,  0x6900,  0xa9c1,  0xa881,  0x6840,
X0x7800,  0xb8c1,  0xb981,  0x7940,  0xbb01,  0x7bc0,  0x7a80,  0xba41,
X0xbe01,  0x7ec0,  0x7f80,  0xbf41,  0x7d00,  0xbdc1,  0xbc81,  0x7c40,
X0xb401,  0x74c0,  0x7580,  0xb541,  0x7700,  0xb7c1,  0xb681,  0x7640,
X0x7200,  0xb2c1,  0xb381,  0x7340,  0xb101,  0x71c0,  0x7080,  0xb041,
X0x5000,  0x90c1,  0x9181,  0x5140,  0x9301,  0x53c0,  0x5280,  0x9241,
X0x9601,  0x56c0,  0x5780,  0x9741,  0x5500,  0x95c1,  0x9481,  0x5440,
X0x9c01,  0x5cc0,  0x5d80,  0x9d41,  0x5f00,  0x9fc1,  0x9e81,  0x5e40,
X0x5a00,  0x9ac1,  0x9b81,  0x5b40,  0x9901,  0x59c0,  0x5880,  0x9841,
X0x8801,  0x48c0,  0x4980,  0x8941,  0x4b00,  0x8bc1,  0x8a81,  0x4a40,
X0x4e00,  0x8ec1,  0x8f81,  0x4f40,  0x8d01,  0x4dc0,  0x4c80,  0x8c41,
X0x4400,  0x84c1,  0x8581,  0x4540,  0x8701,  0x47c0,  0x4680,  0x8641,
X0x8201,  0x42c0,  0x4380,  0x8341,  0x4100,  0x81c1,  0x8081,  0x4040,
X} ;
X
XWTYPE
Xupdcrc( icrc, icp, icnt )
X    WTYPE icrc;
X    unsigned char *icp;
X    int icnt;
X{
X    register WTYPE crc = icrc;
X    register unsigned char *cp = icp;
X    register int cnt = icnt;
X
X    while( cnt-- ) {
X#ifndef SWAPPED
X	crc = (crc<<B) ^ crctab[(crc>>(W-B)) ^ *cp++];
X#else
X	crc = (crc>>B) ^ crctab[(crc & ((1<<B)-1)) ^ *cp++]; 
X#endif SWAPPED
X    }
X
X    return( crc );
X}
X
X#ifdef MAKETAB
X
X#include <stdio.h>
Xmain()
X{
X    initcrctab();
X}
X
Xinitcrctab()
X{
X    register  int b, i;
X    WTYPE v;
X
X    
X    for( b = 0; b <= (1<<B)-1; ++b ) {
X#ifndef SWAPPED
X	for( v = b<<(W-B), i = B; --i >= 0; )
X	    v = v & ((WTYPE)1<<(W-1)) ? (v<<1)^P : v<<1;
X#else
X	for( v = b, i = B; --i >= 0; )
X	    v = v & 1 ? (v>>1)^P : v>>1;
X#endif	    
X	crctab[b] = v;
X
X	printf( "0x%lx,", v & ((1L<<W)-1L));
X	if( (b&7) == 7 )
X	    printf("\n" );
X	else
X	    printf("  ");
X    }
X}
X#endif
X
X#ifdef TEST
X
X#include <stdio.h>
X#include <fcntl.h>
X
X#define MAXBUF	4096
X
X
X
Xmain( ac, av )
X    int ac; char **av;
X{
X    int fd;
X    int nr;
X    int i;
X    char buf[MAXBUF];
X    WTYPE crc, crc2;
X
X    fd = 0;
X    if( ac > 1 )
X	if( (fd = open( av[1], O_RDONLY )) < 0 ) {
X	    perror( av[1] );
X	    exit( -1 );
X	}
X    crc = crc2 = INIT_CRC;
X
X    while( (nr = read( fd, buf, MAXBUF )) > 0 ) {
X	crc = updcrc( crc, buf, nr );
X    }
X
X    if( nr != 0 )
X	perror( "reading" );
X    else {
X	printf( "%lx\n", crc );
X    }
X
X#ifdef MAGICCHECK
X    /* tack one's complement of crc onto data stream, and
X       continue crc calculation.  Should get a constant (magic number)
X       dependent only on P, not the data.
X     */
X    crc2 = crc ^ -1L;
X    for( nr = W-B; nr >= 0; nr -= B ) {
X	buf[0] = (crc2 >> nr);
X	crc = updcrc(crc, buf, 1);
X    }
X
X    /* crc should now equal magic */
X    buf[0] = buf[1] = buf[2] = buf[3] = 0;
X    printf( "magic test: %lx =?= %lx\n", crc, updcrc(-1, buf, W/B));
X#endif MAGICCHECK
X}
X
X#endif
SHAR_EOF
if test 5848 -ne "`wc -c < 'updcrc.c'`"
then
	echo shar: error transmitting "'updcrc.c'" '(should have been 5848 characters)'
fi
fi # end of overwriting check
echo shar: extracting "'macbinfilt.c'" '(3638 characters)'
if test -f 'macbinfilt.c'
then
	echo shar: will not over-write existing file "'macbinfilt.c'"
else
sed 's/^X//' << \SHAR_EOF > 'macbinfilt.c'
X/*
X * macbinfilt -- filters usenet articles from comp.binaries.mac into a form
X *  suitable for xbin to decode.  Will rearange parts of file if they are not
X *  in order.  Strips out all extraneous lines.
X *  Does all of this by making many bold assumtions--but it's worked so far.
X *
X *  Only works on one article at a time.  All files on the input line are
X *  considered parts of the same article.
X *
X *  If you have the sysV regualar expression routines (regcmp, regex) then
X *  define HAVE_REGCMP for a more robust pattern match.
X *
X *  --Tom Bereiter
X *    ..!{rutgers,ames}!cs.utexas.edu!halley!rolex!twb
X */
X#include <stdio.h>
X
Xint cur_part,part,divert_part;
Xint max_part;
X#define IBUFSZ	512
Xchar ibuf[IBUFSZ];
Xchar pname[80];
XFILE *ofs=stdout;
XFILE *saveofs;
XFILE *parts[100];
X
X#ifdef HAVE_REGCMP
X#define EXP ".*[Pp][Aa][Rr][Tt][ \t]*([0-9]+)$0[ \t]*[Oo][Ff][ \t]*([0-9]+)$1"
X#else
X#define EXP "part %d of %d"
X#endif
Xchar *exp;
X
Xmain(argc,argv) char **argv[]; {
X	FILE *fs;
X	int i,rc=0;
X
X#ifdef HAVE_REGCMP
X	exp = (char *)regcmp(EXP,0);
X#else
X	exp = EXP;
X#endif
X
X	fputs("(This file must be converted with BinHex 4.0)\n\n",ofs);
X
X	if (argc == 1)
X		filter(stdin);
X	else while (--argc) {
X		if ((fs=fopen(*++argv,"r"))==NULL) {
X			perror(*argv); exit(-1); }
X		filter(fs);
X		fclose(fs);
X	}
X	/* add any remaining parts */
X	for (i=cur_part+1; i<=max_part; i++)
X		if (parts[i])
X			putpart(i);
X		else {
X			fprintf(stderr,"Missing part %d\n",i);
X			rc = -1;
X		}
X	exit(rc);
X}
X
X/* valid xbin chars + '\n' and '\r' */
X#define	Btst(i) (bmap[i>>3] & (1<<(i&07)))
Xchar bmap[]={0x00,0x24,0x00,0x00,0xfe,0x3f,0x7f,0x07,
X			 0xff,0x7f,0x7f,0x0f,0x7f,0x3f,0x07,0x00};
X
X/* filter out extraneous lines and look for lines of the form:
X *    part n of m
X * A line is considered valid if it has only valid xbin characters and is
X * either greater than 60 characters or ends in a ':'
X */
X
Xfilter(fs) FILE *fs; {
X	register char *p,*inp;
X
Xreget:
X	while ((inp=fgets(ibuf,IBUFSZ,fs))) {
X		for (p=inp; *p; p++)
X			if (Btst(*p) == 0) {	/* invalid character */
X				checkparts(inp);
X				goto reget;
X			}
X		if (p-inp > 60 || inp[(p-inp)-2]==':')	/* arbitrary max or end */
X			fputs(ibuf,ofs);
X	}
X	if (divert_part)	/* diversion in progress */
X		end_oseq();
X}
X
Xcheckparts(str) char *str; {
X	char *p;
X	char num0[40], num1[40];
X
X#ifdef HAVE_REGEXP
X	if (regex(exp, str, num0,num1)!=NULL) {
X		part = atoi(num0);
X		max_part = atoi(num1);
Xfprintf(stderr,"part %d of %d\n",part,max_part);
X		dopart();
X	}
X#else
X	for (p=str; *p; p++)	/* rescan for 'part' string */
X		if (*p==exp[0])
X			if (sscanf(p,exp,&part,&max_part) == 2) {
X				dopart();
X				break;
X			}
X#endif
X}
X
Xdopart() {
X	if (divert_part) {	/* diversion in progress */
X		if (part == divert_part)	/* another mention of current part */
X			return;
X		end_oseq();
X	}
X	if (part == cur_part+1) 	/* OK: next in sequence */
X		cur_part = part;
X	else if (part > cur_part) 	/* out of sequence */
X		oseq();
X	else 	/* "can't" happen */
X		fprintf(stderr,"Part %d unexpected\n",part);
X}
X
X/* part out of sequence */
Xoseq() {
X	int i;
X
X	/* try and fill in gap */
X	for (i=cur_part+1; i<part; i++)
X		if (parts[i]) {
X			putpart(i);
X			cur_part = i;
X		}
X		else goto isgap;
X	/* all missing parts restored -- continue */
X	return;
Xisgap:
X	/* start diversion */
X	divert_part = part;
X	saveofs = ofs;
X	sprintf(pname,"part%d",part);
X	if ((ofs = fopen(pname,"w+")) == NULL) {
X		perror(pname); exit(-1); }
X	parts[part] = ofs;
X}
Xend_oseq() {
X	divert_part = 0;
X	ofs = saveofs;
X}
X
Xputpart(n) {
X	FILE *fs;
X	register int c;
X
X	fs = parts[n];
X	rewind(fs);
X	while ((c=getc(fs))!=EOF)
X		putc(c,ofs);
X	fclose(fs);
X	sprintf(pname,"part%d",n);
X	unlink(pname);
X}
SHAR_EOF
if test 3638 -ne "`wc -c < 'macbinfilt.c'`"
then
	echo shar: error transmitting "'macbinfilt.c'" '(should have been 3638 characters)'
fi
fi # end of overwriting check
#	End of shell archive
exit 0
---