🚀 go-pugleaf

In article <486179375D%Brian@fingask.demon.co.uk>, Brian Howlett
<Brian@fingask.demon.co.uk> writes
>I have recently been trying (and it is *very* trying!) to get Trumpet
>Winsock set up on the PC card side, as I have not used the PC browsers
>to any great extent. 
I initially had a dial-up account with RMplc whiched used Trumpet
Winsock, but I now dial into Demon using Turnpike with the Connect
utility.  My Connect.ini file looks like this:-
[PATHS]
AdminPath1=C:\TURNPIKE\
NewsPath1=C:\TURNPIKE\NEWS
MailPath1=C:\TURNPIKE\MAIL
Name1=tony
Restart=NO
Winsock=YES
Initial=NO

[FUNCTION]
Command1=callcosts
Command2=turnpike
Command3=NO,WWW,Netscape,"C:\NETSCAPE\COMM\PROGRAM\NETSCAPE.EXE","C:\NET
SCAPE\COMM\PROGRAM",""
Command4=YES,FTP,Transfer files using the FTP protocol,"~WS_FTP\FTPEVA.E
XE","",""
Command5=telnet
Command6=finger
Command7=ping
Command8=traceroute
Command9=YES,ie4,Internet Explorer,"~IEXPLORE\IEXPLORE.EXE","~IEXPLORE",
""
Command10=unassigned
Command11=unassigned
Command12=unassigned
Command13=unassigned
Command14=unassigned
Command15=unassigned
Command16=unassigned
Command17=unassigned
Command18=unassigned
Command19=unassigned
Command20=unassigned

[LOGIN]
PrevID=C9AJ-QGY9-U5UF-4YKT
PrevKey=3BCR=PHMK=FXUM=9XER
ReportedNTS=YES
SiteID=1PM5-WNY5-V1CQ-JHRJ
SiteKey=F8G3=YTRM=Y0HR=CXEL

[ACCESS Demon]
LOGIN=terryfamily
Completed=YES

[TIME]
Zone=GMT,UK

[TIME DEMON]
Server=158.152.1.76
SetClock=YES

[MAIL DEMON]
Gateway=post.demon.co.uk
Gateonly=YES
Incoming=SMTP
MaxServer=12

[MAILDOMAIN DEMON]
Accept=terryfamily.demon.co.uk

[NEWS DEMON]
Collect=YES
Post=YES
Server=news.demon.co.uk, 10, YES
ModerateMail=moderators.uu.net
Expire=NO
ExpireAgain=10
UseNEWNEWS=YES
MaxBack=8
Debug=NO
RefreshGroups=NO

[ONLINE DEMON]
IP=automatic
Gateway=automatic
DNS1=158.152.1.43
DNS2=158.152.1.58

[LOGIN DEMON]
Hostname=terryfamily.demon.co.uk
Domain=terryfamily.demon.co.uk
Local=terryfamily.demon.co.uk
ExpectLocalDomain=YES

[NEWSGROUPS]
Preset=demon.announce
Preset=demon.ip.support.newuser
Preset=news.announce.newusers

[PING]
Position={44,44,569,324}
HOST1=158.152.1.76
HOST2=ntp.demon.co.uk
Maximize=NO

[FINGER]
HOST1=terryfamily@post.demon.co.uk
HOST2=motd@gate.demon.co.uk
HOST3=status@gate.demon.co.uk

[DIALOG DEMON]
Entry=Text,Host name,[*],Login=
Entry=PText,Login password,[*],Password=
Entry=IPaddr,DNS address 1,[ONLINE],DNS1=
Entry=IPaddr,DNS address 2,[ONLINE],DNS2=

[ACCESS]
Provider=Demon

[CONNECT Demon Internet Ltd.]
Access=DEMON.ACC
Tariff=BT - Basic Rate (local calls)
Modem=TRUAE14.MDM
Dial=Tone
PoP=0845 079 8666       "0845 access (NER ROMP)
Phone=0845 079 8666
Port=1
UseCommDRV=NO
Speed=19200

[CONNECT]
Connection1=Demon Internet Ltd.
Retries=5
Timeout=120

[LOGGING]
Position={13,38,730,462}
Maximize=NO

[MAIN]
SingleClick=NO
SingleClickColors=NO
DashDetail=YES
Position={72,24,629,358}
Maximize=NO

[TIPS]
NextTip=1
ShowTips=NO

[TRACEROUTE]
Position={66,66,569,324}
Maximize=NO

[CALLCOSTING]
Position={44,44,630,400}
Maximize=NO
Columns={0,85,235,340,410,475,565}
Sort=1
Reverse=NO
SubtotalOpt=0
ExpireOpt=0

and my Turnpike.ini file looks like this:-
[PATHS]
AdminPath1=C:\TURNPIKE\
NewsPath1=C:\TURNPIKE\NEWS
MailPath1=C:\TURNPIKE\MAIL
Name1=tony

[LOGIN]
SiteID=SiteID=1PM5-WNY5-V1CQ-JHRJ
SiteKey=F8G3=YTRM=Y0HR=CXEL

[MAIN]
SingleClick=NO
SingleClickColors=NO

I hope this is of some help.

-- 
_______________________________ Tony Terry
  |  _   _        |  _  _  _    tony@terryfamily.demon.co.uk
  | |_| | | |_|   | {= |  |  |_|tony.uk@excitepost.co.uk
______________|________________|
       

In message <486179375D%Brian@fingask.demon.co.uk>
          Brian Howlett <Brian@fingask.demon.co.uk> wrote:

> I have recently been trying (and it is *very* trying!) to get Trumpet
> Winsock set up on the PC card side, as I have not used the PC browsers
> to any great extent. I have successfully downloaded and installed it,
> following the instructions, and at the moment I can get it to connect to
> Demon, but not complete the LOGIN script.
> 
> I suspect that the entries I have to amend are the domain= and
> $Username= in the TRUMPWSK/INI file.
> 
> Can anyone who has succeeded with this for a Demon account please point
> me in the right direction?

It's a long time since I set mine up (or used it) but looking at what I
have you should set domain= to fingask.demon.co.uk and $Username= to fingask

I don't recall doing these manually but rather through the File/Setup menu.

-- 
Fred
Mailto:fred@ypical.demon.co.uk
PGP key available