🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Article View: comp.sys.acorn.networking
Article #630

Re: AUNLink with !TCPIP 2.04 - how do you do it?

#630
From: Donald McFarlane
Date: Tue, 14 Mar 1995 20:48
57 lines
3316 bytes
In article <3k1c5r$inj@doc.armltd.co.uk>,
          Clive.Jones@armltd.co.uk (you) wrote:

> In article <3k06ab$qsr@lyra.csx.cam.ac.uk> fanf2@thor.cam.ac.uk (Tony Finch) writes:
> >In article <3jval2$26d@doc.armltd.co.uk>,  <Clive.Jones@armltd.co.uk> wrote:
> >> 
> >> The structure would be:
> >> 
> >>   ---+-------+-------+-------+-------+---
> >>      |       |       |       |       |
> >>                   [Addr A]
> >>                 ACORN TCP/IP
> >>                   [Addr B]
> >>                      |
> >>                   [Addr C]
> >>                    !TCPIP
> >
> >Can't A and B be the same?
> 
> I don't believe that's permitted by the IP standards. In practice,
> nobody in the outside world would notice, I imagine.
> 
> However, also in practice, I expect Unix would barf if you tried to
> configure two of its interfaces to have the same IP address. Since
> Acorn's TCP/IP suite is derived from the BSD one, it would probably
> also object.
> 
> However, please don't take this as an authoritative answer - I've
> never actually tried giving two interfaces the same address!
> 
> --Clive.
>                (Disclaimer: I wouldn't believe a word of this if I were you...)

I think I'll stick with Clive's disclaimer, but....

Whilst as far as I can see A and B must be different, the B and C addresses
(either side of AUNLink) are working quite happily as the same address on
my setup (which is...)

Demon---(SLIP)---158.152.75.99 KA9Q port ax0

10.0.0.1 Acorn port ka0---(AUNLink)---10.0.0.1 KA9Q port ka0

10.0.0.2 Acorn port eb0---ethernet to my disused A5000

I do find it irritating that Access messages get chucked down every port,
and I can't stop them from reaching KA9Q.  Moreover, they are picked up
as valid packets by KA9Q under some circumstances - I telnetted to KA9Q from
Acorn and hence went into the chat thingy, and every now and then I'd get
a broadcast to do with the remote printers come up in the window.  Talking
of which, has Acorn or ANT or anyone published the protocols used by Access
yet?

-- 
preferred email address is dsmcf@sc3d.demon.co.uk unless otherwise specified
web home page URL is http://www.ee.ic.ac.uk/hp/students/ee3/dsm/main.html
... Doing my part to preserve order in the universe
Technical Details
Message-ID: <19950314.204845.28@sc3d.demon.co.uk>
Path: arc1-ca.pugleaf.net!bga.com!news.sprintlink.net!uunet!in1.uu.net!pipex!peernews.demon.co.uk!demon!sc3d.demon.co.uk!dsmcf
References: <kjb1003.83.000E6F0B@phx.cam.ac.uk> <3jval2$26d@doc.armltd.co.uk> <3k06ab$qsr@lyra.csx.cam.ac.uk> <3k1c5r$inj@doc.armltd.co.uk>

Show Full Headers
Complete Article Headers
X-Google-Language: ENGLISH,ASCII-7-bit
X-Google-Thread: 114044,fb51e8fe2f387cc8,start
X-Google-Attributes: gid114044,public
X-Google-Thread: 11173c,52169401e2a0348
X-Google-Attributes: gid11173c,public
X-Google-ArrivalTime: 1995-03-15 01:09:13 PST
Newsgroups: comp.sys.acorn.networking,demon.ip.support.archimedes
Path: arc1-ca.pugleaf.net!bga.com!news.sprintlink.net!uunet!in1.uu.net!pipex!peernews.demon.co.uk!demon!sc3d.demon.co.uk!dsmcf
From: dsmcf@sc3d.demon.co.uk (Donald McFarlane)
Subject: Re: AUNLink with !TCPIP 2.04 - how do you do it?
X-Nntp-Posting-Host: sc3d.demon.co.uk
Message-ID: <19950314.204845.28@sc3d.demon.co.uk>
Sender: news@demon.co.uk (Usenet Administration)
Reply-To: dsmcf@sc3d.demon.co.uk
Organization: Complaints Dept, Sirius Cybernetics Corporation
X-Newsreader: Archimedes TTFN Version 0.36
References: <kjb1003.83.000E6F0B@phx.cam.ac.uk> <3jval2$26d@doc.armltd.co.uk> <3k06ab$qsr@lyra.csx.cam.ac.uk> <3k1c5r$inj@doc.armltd.co.uk>
Date: Tue, 14 Mar 1995 20:48:45 GMT
Lines: 57